component-honglitronic-hl-am-2835h421w-s1-08-hr3
Resolve the exact Honglitronic HL-AM-2835H421W-S1-08-HR3 LED and subordinate FOJAN FRC2512F33R0TS ballast resistor used on Board L. Use for polarity, optical bins, current/voltage limits, thermal/reflow constraints, branch sharing, and resistor stress.
- License 许可
- MIT
- 最近更新
- 2026-11-13
- Stars
- ★ 0
- Forks
- 0
01 前言 Front Matter
- name
- component-honglitronic-hl-am-2835h421w-s1-08-hr3
- description
- Resolve the exact Honglitronic HL-AM-2835H421W-S1-08-HR3 LED and subordinate FOJAN FRC2512F33R0TS ballast resistor used on Board L. Use for polarity, optical bins, current/voltage limits, thermal/reflow constraints, branch sharing, and resistor stress.
02 资源文件 7
- 参考文档coverage.json3.6 KB
- 参考文档facts.json11.4 KB
- 参考文档interactions.json1.5 KB
- 参考文档manifest.json2.3 KB
- 参考文档pin-map.json709 B
- 参考文档routing.json596 B
- 参考文档sources.json4.7 KB
03 SKILL.md 正文
Board L LED string and ballast
Run the central validator and read every local JSON file before using these records. Official primary specifications support the Honglitronic base-MPN LED limits and the exact FOJAN order code and ballast ratings. Available LCSC JSON-LD confirms only the C210315-to-exact-MPN/2800–3100 K/3000 K distributor identity; the bare MPN spans multiple CCT rows. Incoming reel/label/bin acceptance and real eight-branch current sharing remain open.
The LED drawing defines pad 2 as anode and pad 1 as cathode. Exact 3000 K output is 27 lm minimum / 29 lm typical at 60 mA, with Ra at least 80 and forward voltage 2.6 to 3.2 V. Absolute maxima are not operating targets. Follow the assembly section's maximum two reflow cycles; a reliability-test condition mentioning three cycles is not process authorization.
Board L has eight parallel branches, each one 33 ohm ballast followed by three series LEDs. Do not infer total current or current sharing without the driver state, supply waveform, LED bin/Vf distribution, resistor tolerance/temperature, thermal coupling, PWM duty, layout and bench data. An open LED removes its branch; a short or unequal heating redistributes stress. Use the included nominal 60 mA calculations only as arithmetic context, not proof of the design operating point.
Human component reference
Human projection of this bundle: rec-c210315, rec-c2934070. Those pages are generated from the JSON files here and add nothing to them — where the two disagree, this bundle is correct. See also the component catalog and the cross-component rules.
04 同仓库更多 Skills
component-spec-audit
暂无简介
component-spec-audit
Audit exact electronic-component identities and evidence, and run the end-to-end workflow for adding or replacing a component. Use whenever circuit, schematic, PCB, BOM, firmware, bring-up, substitution or documentation work could depend on a component rating, pin, package, source, CAD asset, publication or interaction.
circuit-spec-integration
Audit behavior that spans more than one exact component, such as shared supplies, signal boundaries, startup and reset states, protection, sensing, thermal coupling, firmware assumptions and as-built state. Use whenever a question, substitution or design change involves several component records or a stage beyond a single datasheet.
component-example
Resolve exact EXAMPLE-MPN component limits and application constraints. Use whenever EXAMPLE-MPN, its LCSC ID, manufacturer, function, pins, package, substitution, bring-up, or firmware behavior is relevant.
component-xfcn-board-headers
Audit the exact XFCN PZ254V-11-06P C492405 male and PM254V-11-06-H85 C2832269 female six-position 2.54 mm board-to-board headers. Use for Boards P/L pin order, orientation, footprint, ratings, mating, stock, alignment, or substitution.
component-umw-ao3401a-c347476
Audit the exact UMW (Youtai Semiconductor) AO3401A C347476 P-channel load-switch MOSFET. Use for Board P Q1 identity, gate polarity, pinout, ratings, SOA, thermal behavior, bring-up, or substitution decisions.