AGENT SKILL

circuit-spec-integration

Audit behavior that spans more than one exact component, such as shared supplies, signal boundaries, startup and reset states, protection, sensing, thermal coupling, firmware assumptions and as-built state. Use whenever a question, substitution or design change involves several component records or a stage beyond a single datasheet.

License 许可
MIT
最近更新
2026-11-13
Stars
★ 0
Forks
0

01 前言 Front Matter

name
circuit-spec-integration
description
Audit behavior that spans more than one exact component, such as shared supplies, signal boundaries, startup and reset states, protection, sensing, thermal coupling, firmware assumptions and as-built state. Use whenever a question, substitution or design change involves several component records or a stage beyond a single datasheet.

02 资源文件 1

03 SKILL.md 正文

Circuit specification integration

Individually valid components do not prove the whole circuit. This skill handles the cross-component rules in references/rules.json. The canonical workflow is circuit/WORKFLOW.md.

  1. Run pnpm exec zudo-circuit-doc validate (or pnpm circuit:check) and note pre-existing failures.
  2. Read references/rules.json and load every exact owner bundle named by each matching rule, through the component-spec-audit skill. Resolve manufacturer, MPN and order codes independently; reject conflicts, same-name wrong-vendor parts and ambiguous bare names. Load subordinate records directly.
  3. Use the listed fact IDs with their exact conditions and locators. An UNSOURCED fact cannot close a domain, and design connectivity cannot prove programmed, assembled or measured state.
  4. For a substitution or design change, report the affected rule, the raw facts, recalculated margins with their dependencies, the evidence stages still missing, and one honest verdict. Do not change design files silently.
  5. Recompute conditioned calculations from their inputs. The validator checks the arithmetic, not the units or the reading of the source table; check those yourself.

Adding a rule

The rule list may be empty; { "schema_version": 1, "rules": [] } is valid. Add a rule only when a real interaction exists between exact components. A rule names its rule_id, domain, record_ids, fact_ids (owned by those records), conditions, verdict, refusal text and any conditioned_calculations.

An evidence chain lists stages in order, from the official source and the conditioned requirement through the netlist, symbol and footprint, PCB orientation, BOM and placement, as-built and programmed state, to bench results. Every stage stays OPEN with empty fact_ids until real evidence exists. A completed early stage never implies a later one, and a generated netlist is never CONFIRMED.

After editing rules, update the integration count lock expect.integrationRules in circuit/publication/selection.json, then run pnpm circuit:generate and pnpm check.

04 同仓库更多 Skills

Takazudo
Takazudo/zudo-circuit-doc

component-spec-audit

暂无简介

★ 0
Takazudo
Takazudo/zudo-circuit-doc

component-spec-audit

Audit exact electronic-component identities and evidence, and run the end-to-end workflow for adding or replacing a component. Use whenever circuit, schematic, PCB, BOM, firmware, bring-up, substitution or documentation work could depend on a component rating, pin, package, source, CAD asset, publication or interaction.

★ 0
Takazudo
Takazudo/zudo-circuit-doc

circuit-spec-integration

Audit behavior that spans more than one exact component, such as shared supplies, signal boundaries, startup and reset states, protection, sensing, thermal coupling, firmware assumptions and as-built state. Use whenever a question, substitution or design change involves several component records or a stage beyond a single datasheet.

★ 0
Takazudo
Takazudo/zudo-circuit-doc

component-example

Resolve exact EXAMPLE-MPN component limits and application constraints. Use whenever EXAMPLE-MPN, its LCSC ID, manufacturer, function, pins, package, substitution, bring-up, or firmware behavior is relevant.

★ 0
Takazudo
Takazudo/zudo-circuit-doc

component-xfcn-board-headers

Audit the exact XFCN PZ254V-11-06P C492405 male and PM254V-11-06-H85 C2832269 female six-position 2.54 mm board-to-board headers. Use for Boards P/L pin order, orientation, footprint, ratings, mating, stock, alignment, or substitution.

★ 0
Takazudo
Takazudo/zudo-circuit-doc

component-umw-ao3401a-c347476

Audit the exact UMW (Youtai Semiconductor) AO3401A C347476 P-channel load-switch MOSFET. Use for Board P Q1 identity, gate polarity, pinout, ratings, SOA, thermal behavior, bring-up, or substitution decisions.

★ 0