homelab-network-setup
Practical home and homelab network planning for gateways, switches, access points, IP ranges, DHCP reservations, DNS, cabling, and common beginner mistakes.
- License 许可
- MIT
- 最近更新
- 2026-11-15
- Stars
- ★ 0
- Forks
- 0
01 前言 Front Matter
- name
- homelab-network-setup
- metadata
- { "origin": "community" }
- description
- Practical home and homelab network planning for gateways, switches, access points, IP ranges, DHCP reservations, DNS, cabling, and common beginner mistakes.
03 SKILL.md 正文
Homelab Network Setup
Use this skill to design a home or small-lab network that can grow without needing a full rebuild.
When to Use
- Planning a new home network or redesigning an ISP-router-only setup.
- Choosing gateway, switch, and access point roles.
- Designing IP ranges, DHCP scopes, static reservations, and DNS.
- Preparing for future VLANs, Pi-hole, NAS, lab servers, or VPN access.
- Troubleshooting a new network that has double NAT, unstable Wi-Fi, or changing server addresses.
How It Works
Start by separating device roles:
Internet
|
Modem or ONT
|
Gateway or router NAT, firewall, DHCP, DNS, inter-VLAN routing
|
Managed switch wired clients, AP uplinks, optional VLAN trunks
|
Access points Wi-Fi only; ideally wired backhaul
Servers and NAS stable addresses, DNS names, monitoring
Clients and IoT DHCP pools, isolated later if VLANs are available
Pick a gateway that matches the operator, not just the feature checklist:
| Option | Best fit | Notes |
|---|---|---|
| ISP router | Basic internet only | Limited control and often poor VLAN support |
| UniFi gateway | Managed home network | Good UI, ecosystem lock-in |
| OPNsense or pfSense | Flexible homelab | Strong VLAN, firewall, VPN, and DNS control |
| MikroTik | Advanced network users | Powerful, but easy to misconfigure |
| Linux router | Tinkerers | Document rollback before using as primary gateway |
IP Plan
Avoid the most common default, 192.168.1.0/24, when you expect to use VPNs.
It often conflicts with hotels, offices, and ISP routers.
Example small homelab plan:
192.168.10.0/24 trusted clients
192.168.20.0/24 IoT and media devices
192.168.30.0/24 servers and NAS
192.168.40.0/24 guest Wi-Fi
192.168.99.0/24 network management
Gateway convention: .1
Infrastructure reservations: .2 through .49
Dynamic DHCP pool: .50 through .240
Spare room: .241 through .254
Use home.arpa for local names. It is reserved for home networks and avoids the
leakage/conflict problems of ad hoc names like home.lan.
nas.home.arpa
pihole.home.arpa
gateway.home.arpa
switch-01.home.arpa
DHCP And DNS
- Use DHCP reservations for anything you SSH into, bookmark, monitor, or expose as a service.
- Hand out the gateway as DNS until a local resolver is intentionally deployed.
- If using Pi-hole or another DNS filter, give it a reservation first, then point DHCP DNS options at that address.
- Keep a small static/reserved range per subnet so replacements do not collide with dynamic leases.
Cabling And Wi-Fi
- Prefer wired AP backhaul over mesh when you can run Ethernet.
- Use a PoE switch for APs and cameras if the budget allows it.
- Label both ends of each cable and keep a simple port map.
- Put the gateway, switch, DNS server, and NAS on UPS power if outages are common.
Examples
Beginner Upgrade
Goal: Keep the ISP router but stabilize a small lab.
- Set DHCP reservations for NAS, Pi, and any SSH hosts.
- Move local names to
home.arpa. - Disable duplicate DHCP servers on secondary routers or APs.
- Wire the main AP instead of relying on wireless backhaul.
VLAN-Ready Plan
Goal: Prepare for future segmentation without enabling it immediately.
- Choose non-overlapping /24 ranges for trusted, IoT, servers, guest, and management.
- Reserve .1 for the gateway and .2-.49 for infrastructure on every subnet.
- Buy a gateway and switch that support VLANs and inter-VLAN firewall rules.
- Document which SSIDs and switch ports will eventually map to each network.
Anti-Patterns
- Double NAT without a reason or documentation.
- Using
192.168.1.0/24when VPN access is planned. - Dynamic addresses for NAS, Pi-hole, Home Assistant, or other service hosts.
- Consumer routers repurposed as APs while their DHCP servers are still enabled.
- Flat networks with cameras, smart plugs, laptops, and servers all sharing the same trust boundary.
See Also
- Skill:
network-interface-health - Skill:
network-config-validation
04 同仓库更多 Skills
rag-architect-agent
Agente Arquiteto de RAG, Embeddings & Busca Vetorial. Especialista em design e implementação de pipelines de Retrieval-Augmented Generation de alta fidelidade: chunking semântico, modelagem pgvector no PostgreSQL (Neon/Supabase), busca híbrida (cosseno + BM25), reranking, validação via TypeSafe AI e filosofia Ponytail (anti-overengineering).
rag-architecture-patterns
Padrões arquiteturais e implementação de pipelines RAG (Retrieval-Augmented Generation) de alta fidelidade para qualquer projeto ou sistema. Cobre chunking semântico, embeddings, busca híbrida (pgvector + BM25), reranking, validação via TypeSafe AI e filosofia Ponytail (anti-overengineering).
skill-repair
Use this to fix and re-install agent skills that have failed installation. This skill provides the necessary context and permissions to surgically update the `manifest.json` after a fix has been applied.
security-scan
Scan your Claude Code configuration (.claude/ directory) for security vulnerabilities, misconfigurations, and injection risks using AgentShield. Checks CLAUDE.md, settings.json, MCP servers, hooks, and agent definitions.
security-review
Use this skill when adding authentication, handling user input, working with secrets, creating API endpoints, or implementing payment/sensitive features. Provides comprehensive security checklist and patterns.
security-bounty-hunter
Hunt for exploitable, bounty-worthy security issues in repositories. Focuses on remotely reachable vulnerabilities that qualify for real reports instead of noisy local-only findings.