dc-power-flow
DC power flow analysis for power systems. Use when computing power flows using DC approximation, building susceptance matrices, calculating line flows and loading percentages, or performing sensitivity analysis on transmission networks.
- License 许可
- Apache-2.0
- 最近更新
- 2026-11-14
- Stars
- ★ 0
- Forks
- 1
01 前言 Front Matter
- name
- dc-power-flow
- description
- DC power flow analysis for power systems. Use when computing power flows using DC approximation, building susceptance matrices, calculating line flows and loading percentages, or performing sensitivity analysis on transmission networks.
02 资源文件 1
- 脚本scripts/build_b_matrix.py3.1 KB
03 SKILL.md 正文
DC Power Flow
DC power flow is a linearized approximation of AC power flow, suitable for economic dispatch and contingency analysis.
DC Approximations
- Lossless lines - Ignore resistance (R ≈ 0)
- Flat voltage - All bus voltages = 1.0 pu
- Small angles - sin(θ) ≈ θ, cos(θ) ≈ 1
Result: Power flow depends only on bus angles (θ) and line reactances (X).
Bus Number Mapping
Power system bus numbers may not be contiguous (e.g., case300 has non-sequential bus IDs). Always create a mapping from bus numbers to 0-indexed array positions:
# Create mapping: bus_number -> 0-indexed position
bus_num_to_idx = {int(buses[i, 0]): i for i in range(n_bus)}
# Use mapping for branch endpoints
f = bus_num_to_idx[int(br[0])] # NOT br[0] - 1
t = bus_num_to_idx[int(br[1])]
Susceptance Matrix (B)
Build from branch reactances using bus number mapping:
# Run: scripts/build_b_matrix.py
# Or inline:
bus_num_to_idx = {int(buses[i, 0]): i for i in range(n_bus)}
B = np.zeros((n_bus, n_bus))
Pshift = np.zeros(n_bus) # phase-shift injections (pu), for Pg - Pd - Pshift = B @ theta
for br in branches:
# Skip out-of-service branches (BR_STATUS at index 10)
if int(br[10]) == 0:
continue
f = bus_num_to_idx[int(br[0])] # Map bus number to index
t = bus_num_to_idx[int(br[1])]
x = br[3] # Reactance
if x == 0:
continue
# Transformer modeling (TAP at index 8, SHIFT at index 9 in degrees)
tap = float(br[8]) if br[8] not in (0, None) else 1.0
shift = np.deg2rad(float(br[9])) if len(br) > 9 else 0.0
b = 1.0 / x
# B matrix contributions with off-nominal tap
B[f, f] += b / (tap * tap)
B[t, t] += b
B[f, t] -= b / tap
B[t, f] -= b / tap
# Phase shift modeled as constant injections
if shift != 0.0:
Pshift[f] += -(b / tap) * shift
Pshift[t] += +(b / tap) * shift
Power Balance Equation
At each bus: Pg - Pd - Pshift = B[i, :] @ θ (include Pshift if any in-service transformer has nonzero SHIFT)
Where:
- Pg = generation at bus (pu)
- Pd = load at bus (pu)
- θ = vector of bus angles (radians)
Slack Bus
One bus must have θ = 0 as reference. Find slack bus (type=3):
slack_idx = None
for i in range(n_bus):
if buses[i, 1] == 3:
slack_idx = i
break
constraints.append(theta[slack_idx] == 0)
Line Flow Calculation
Flow on branch from bus f to bus t (use bus number mapping):
f = bus_num_to_idx[int(br[0])]
t = bus_num_to_idx[int(br[1])]
# Skip out-of-service branches
if int(br[10]) == 0:
continue
tap = float(br[8]) if br[8] not in (0, None) else 1.0
shift = np.deg2rad(float(br[9])) if len(br) > 9 else 0.0
b = 1.0 / br[3] # Susceptance = 1/X
# Transformer DC flow model (tap + phase shift)
flow_pu = (b / tap) * ((theta[f] - theta[t]) - shift)
flow_MW = flow_pu * baseMVA
Line Loading Percentage
loading_pct = abs(flow_MW) / rating_MW * 100
Where rating_MW = branch[5] (RATE_A column).
Branch Susceptances for Constraints
Store susceptances when building constraints:
branch_susceptances = []
for br in branches:
x = br[3]
b = 1.0 / x if x != 0 else 0
branch_susceptances.append(b)
Line Flow Limits (for OPF)
Enforce thermal limits as linear constraints:
# |flow| <= rating → -rating <= flow <= rating
if int(br[10]) == 0:
continue
tap = float(br[8]) if br[8] not in (0, None) else 1.0
shift = np.deg2rad(float(br[9])) if len(br) > 9 else 0.0
flow = (b / tap) * ((theta[f] - theta[t]) - shift) * baseMVA
constraints.append(flow <= rate)
constraints.append(flow >= -rate)
04 同仓库更多 Skills
video-frame-extraction
Extract frames from video files and save them as images using OpenCV
openai-vision
Analyze images and multi-frame sequences using OpenAI GPT vision models
image-ocr
Extract text content from images using Tesseract OCR via Python, including structured field extraction from receipts and forms
video-frame-extraction
Extract frames from video files and save them as images using OpenCV
openai-vision
Analyze images and multi-frame sequences using OpenAI GPT vision models
image-ocr
Extract text content from images using Tesseract OCR via Python, including structured field extraction from receipts and forms