quantizing-models-bitsandbytes
Quantizes LLMs to 8-bit or 4-bit for 50-75% memory reduction with minimal accuracy loss. Use when GPU memory is limited, need to fit larger models, or want faster inference. Supports INT8, NF4, FP4 formats, QLoRA training, and 8-bit optimizers. Works with HuggingFace Transformers.
- License 许可
- MIT
- 最近更新
- 2026-11-10
- Stars
- ★ 1
- Forks
- 0
01 前言 Front Matter
- name
- quantizing-models-bitsandbytes
- tags
- [ "Optimization", "Bitsandbytes", "Quantization", "8-Bit", "4-Bit", "Memory Optimization", "QLoRA", "NF4", "INT8", "HuggingFace", "Efficient Inference" ]
- author
- Orchestra Research
- license
- MIT
- version
- 1.0.0
- description
- Quantizes LLMs to 8-bit or 4-bit for 50-75% memory reduction with minimal accuracy loss. Use when GPU memory is limited, need to fit larger models, or want faster inference. Supports INT8, NF4, FP4 formats, QLoRA training, and 8-bit optimizers. Works with HuggingFace Transformers.
- dependencies
- [ "bitsandbytes", "transformers", "accelerate", "torch" ]
02 资源文件 3
- 参考文档references/memory-optimization.md12.3 KB
- 参考文档references/qlora-training.md11.7 KB
- 参考文档references/quantization-formats.md10.0 KB
03 SKILL.md 正文
bitsandbytes - LLM Quantization
Quick start
bitsandbytes reduces LLM memory by 50% (8-bit) or 75% (4-bit) with <1% accuracy loss.
Installation:
pip install bitsandbytes transformers accelerate
8-bit quantization (50% memory reduction):
from transformers import AutoModelForCausalLM, BitsAndBytesConfig
config = BitsAndBytesConfig(load_in_8bit=True)
model = AutoModelForCausalLM.from_pretrained(
"meta-llama/Llama-2-7b-hf",
quantization_config=config,
device_map="auto"
)
# Memory: 14GB → 7GB
4-bit quantization (75% memory reduction):
config = BitsAndBytesConfig(
load_in_4bit=True,
bnb_4bit_compute_dtype=torch.float16
)
model = AutoModelForCausalLM.from_pretrained(
"meta-llama/Llama-2-7b-hf",
quantization_config=config,
device_map="auto"
)
# Memory: 14GB → 3.5GB
Common workflows
Workflow 1: Load large model in limited GPU memory
Copy this checklist:
Quantization Loading:
- [ ] Step 1: Calculate memory requirements
- [ ] Step 2: Choose quantization level (4-bit or 8-bit)
- [ ] Step 3: Configure quantization
- [ ] Step 4: Load and verify model
Step 1: Calculate memory requirements
Estimate model memory:
FP16 memory (GB) = Parameters × 2 bytes / 1e9
INT8 memory (GB) = Parameters × 1 byte / 1e9
INT4 memory (GB) = Parameters × 0.5 bytes / 1e9
Example (Llama 2 7B):
FP16: 7B × 2 / 1e9 = 14 GB
INT8: 7B × 1 / 1e9 = 7 GB
INT4: 7B × 0.5 / 1e9 = 3.5 GB
Step 2: Choose quantization level
| GPU VRAM | Model Size | Recommended |
|---|---|---|
| 8 GB | 3B | 4-bit |
| 12 GB | 7B | 4-bit |
| 16 GB | 7B | 8-bit or 4-bit |
| 24 GB | 13B | 8-bit or 70B 4-bit |
| 40+ GB | 70B | 8-bit |
Step 3: Configure quantization
For 8-bit (better accuracy):
from transformers import BitsAndBytesConfig
import torch
config = BitsAndBytesConfig(
load_in_8bit=True,
llm_int8_threshold=6.0, # Outlier threshold
llm_int8_has_fp16_weight=False
)
For 4-bit (maximum memory savings):
config = BitsAndBytesConfig(
load_in_4bit=True,
bnb_4bit_compute_dtype=torch.float16, # Compute in FP16
bnb_4bit_quant_type="nf4", # NormalFloat4 (recommended)
bnb_4bit_use_double_quant=True # Nested quantization
)
Step 4: Load and verify model
from transformers import AutoModelForCausalLM, AutoTokenizer
model = AutoModelForCausalLM.from_pretrained(
"meta-llama/Llama-2-13b-hf",
quantization_config=config,
device_map="auto", # Automatic device placement
torch_dtype=torch.float16
)
tokenizer = AutoTokenizer.from_pretrained("meta-llama/Llama-2-13b-hf")
# Test inference
inputs = tokenizer("Hello, how are you?", return_tensors="pt").to("cuda")
outputs = model.generate(**inputs, max_length=50)
print(tokenizer.decode(outputs[0]))
# Check memory
import torch
print(f"Memory allocated: {torch.cuda.memory_allocated()/1e9:.2f}GB")
Workflow 2: Fine-tune with QLoRA (4-bit training)
QLoRA enables fine-tuning large models on consumer GPUs.
Copy this checklist:
QLoRA Fine-tuning:
- [ ] Step 1: Install dependencies
- [ ] Step 2: Configure 4-bit base model
- [ ] Step 3: Add LoRA adapters
- [ ] Step 4: Train with standard Trainer
Step 1: Install dependencies
pip install bitsandbytes transformers peft accelerate datasets
Step 2: Configure 4-bit base model
from transformers import AutoModelForCausalLM, BitsAndBytesConfig
import torch
bnb_config = BitsAndBytesConfig(
load_in_4bit=True,
bnb_4bit_compute_dtype=torch.float16,
bnb_4bit_quant_type="nf4",
bnb_4bit_use_double_quant=True
)
model = AutoModelForCausalLM.from_pretrained(
"meta-llama/Llama-2-7b-hf",
quantization_config=bnb_config,
device_map="auto"
)
Step 3: Add LoRA adapters
from peft import LoraConfig, get_peft_model, prepare_model_for_kbit_training
# Prepare model for training
model = prepare_model_for_kbit_training(model)
# Configure LoRA
lora_config = LoraConfig(
r=16, # LoRA rank
lora_alpha=32, # LoRA alpha
target_modules=["q_proj", "k_proj", "v_proj", "o_proj"],
lora_dropout=0.05,
bias="none",
task_type="CAUSAL_LM"
)
# Add LoRA adapters
model = get_peft_model(model, lora_config)
model.print_trainable_parameters()
# Output: trainable params: 4.2M || all params: 6.7B || trainable%: 0.06%
Step 4: Train with standard Trainer
from transformers import Trainer, TrainingArguments
training_args = TrainingArguments(
output_dir="./qlora-output",
per_device_train_batch_size=4,
gradient_accumulation_steps=4,
num_train_epochs=3,
learning_rate=2e-4,
fp16=True,
logging_steps=10,
save_strategy="epoch"
)
trainer = Trainer(
model=model,
args=training_args,
train_dataset=train_dataset,
tokenizer=tokenizer
)
trainer.train()
# Save LoRA adapters (only ~20MB)
model.save_pretrained("./qlora-adapters")
Workflow 3: 8-bit optimizer for memory-efficient training
Use 8-bit Adam/AdamW to reduce optimizer memory by 75%.
8-bit Optimizer Setup:
- [ ] Step 1: Replace standard optimizer
- [ ] Step 2: Configure training
- [ ] Step 3: Monitor memory savings
Step 1: Replace standard optimizer
import bitsandbytes as bnb
from transformers import Trainer, TrainingArguments
# Instead of torch.optim.AdamW
model = AutoModelForCausalLM.from_pretrained("model-name")
training_args = TrainingArguments(
output_dir="./output",
per_device_train_batch_size=8,
optim="paged_adamw_8bit", # 8-bit optimizer
learning_rate=5e-5
)
trainer = Trainer(
model=model,
args=training_args,
train_dataset=train_dataset
)
trainer.train()
Manual optimizer usage:
import bitsandbytes as bnb
optimizer = bnb.optim.AdamW8bit(
model.parameters(),
lr=1e-4,
betas=(0.9, 0.999),
eps=1e-8
)
# Training loop
for batch in dataloader:
loss = model(**batch).loss
loss.backward()
optimizer.step()
optimizer.zero_grad()
Step 2: Configure training
Compare memory:
Standard AdamW optimizer memory = model_params × 8 bytes (states)
8-bit AdamW memory = model_params × 2 bytes
Savings = 75% optimizer memory
Example (Llama 2 7B):
Standard: 7B × 8 = 56 GB
8-bit: 7B × 2 = 14 GB
Savings: 42 GB
Step 3: Monitor memory savings
import torch
before = torch.cuda.memory_allocated()
# Training step
optimizer.step()
after = torch.cuda.memory_allocated()
print(f"Memory used: {(after-before)/1e9:.2f}GB")
When to use vs alternatives
Use bitsandbytes when:
- GPU memory limited (need to fit larger model)
- Training with QLoRA (fine-tune 70B on single GPU)
- Inference only (50-75% memory reduction)
- Using HuggingFace Transformers
- Acceptable 0-2% accuracy degradation
Use alternatives instead:
- GPTQ/AWQ: Production serving (faster inference than bitsandbytes)
- GGUF: CPU inference (llama.cpp)
- FP8: H100 GPUs (hardware FP8 faster)
- Full precision: Accuracy critical, memory not constrained
Common issues
Issue: CUDA error during loading
Install matching CUDA version:
# Check CUDA version
nvcc --version
# Install matching bitsandbytes
pip install bitsandbytes --no-cache-dir
Issue: Model loading slow
Use CPU offload for large models:
model = AutoModelForCausalLM.from_pretrained(
"model-name",
quantization_config=config,
device_map="auto",
max_memory={0: "20GB", "cpu": "30GB"} # Offload to CPU
)
Issue: Lower accuracy than expected
Try 8-bit instead of 4-bit:
config = BitsAndBytesConfig(load_in_8bit=True)
# 8-bit has <0.5% accuracy loss vs 1-2% for 4-bit
Or use NF4 with double quantization:
config = BitsAndBytesConfig(
load_in_4bit=True,
bnb_4bit_quant_type="nf4", # Better than fp4
bnb_4bit_use_double_quant=True # Extra accuracy
)
Issue: OOM even with 4-bit
Enable CPU offload:
model = AutoModelForCausalLM.from_pretrained(
"model-name",
quantization_config=config,
device_map="auto",
offload_folder="offload", # Disk offload
offload_state_dict=True
)
Advanced topics
QLoRA training guide: See references/qlora-training.md for complete fine-tuning workflows, hyperparameter tuning, and multi-GPU training.
Quantization formats: See references/quantization-formats.md for INT8, NF4, FP4 comparison, double quantization, and custom quantization configs.
Memory optimization: See references/memory-optimization.md for CPU offloading strategies, gradient checkpointing, and memory profiling.
Hardware requirements
- GPU: NVIDIA with compute capability 7.0+ (Turing, Ampere, Hopper)
- VRAM: Depends on model and quantization
- 4-bit Llama 2 7B: 4GB
- 4-bit Llama 2 13B: 8GB
- 4-bit Llama 2 70B: 24GB
- CUDA: 11.1+ (12.0+ recommended)
- PyTorch: 2.0+
Supported platforms: NVIDIA GPUs (primary), AMD ROCm, Intel GPUs (experimental)
Resources
- GitHub: https://github.com/bitsandbytes-foundation/bitsandbytes
- HuggingFace docs: https://huggingface.co/docs/transformers/quantization/bitsandbytes
- QLoRA paper: "QLoRA: Efficient Finetuning of Quantized LLMs" (2023)
- LLM.int8() paper: "LLM.int8(): 8-bit Matrix Multiplication for Transformers at Scale" (2022)
04 同仓库更多 Skills
vercel-sandbox
Run agent-browser + Chrome inside Vercel Sandbox microVMs for browser automation from any Vercel-deployed app. Use when the user needs browser automation in a Vercel app (Next.js, SvelteKit, Nuxt, Remix, Astro, etc.), wants to run headless Chrome without binary size limits, needs persistent browser sessions across commands, or wants ephemeral isolated browser environments. Triggers include "Vercel Sandbox browser", "microVM Chrome", "agent-browser in sandbox", "browser automation on Vercel", or any task requiring Chrome in a Vercel Sandbox.
slack
Interact with Slack workspaces using browser automation. Use when the user needs to check unread channels, navigate Slack, send messages, extract data, find information, search conversations, or automate any Slack task. Triggers include "check my Slack", "what channels have unreads", "send a message to", "search Slack for", "extract from Slack", "find who said", or any task requiring programmatic Slack interaction.
electron
Automate Electron desktop apps (VS Code, Slack, Discord, Figma, Notion, Spotify, etc.) using agent-browser via Chrome DevTools Protocol. Use when the user needs to interact with an Electron app, automate a desktop app, connect to a running app, control a native app, or test an Electron application. Triggers include "automate Slack app", "control VS Code", "interact with Discord app", "test this Electron app", "connect to desktop app", or any task requiring automation of a native Electron application.
dogfood
Systematically explore and test a web application to find bugs, UX issues, and other problems. Use when asked to "dogfood", "QA", "exploratory test", "find issues", "bug hunt", "test this app/site/platform", or review the quality of a web application. Produces a structured report with full reproduction evidence -- step-by-step screenshots, repro videos, and detailed repro steps for every issue -- so findings can be handed directly to the responsible teams.
agent-browser
Browser automation CLI for AI agents. Use when the user needs to interact with websites, including navigating pages, filling forms, clicking buttons, taking screenshots, extracting data, testing web apps, or automating any browser task. Triggers include requests to "open a website", "fill out a form", "click a button", "take a screenshot", "scrape data from a page", "test this web app", "login to a site", "automate browser actions", or any task requiring programmatic web interaction.
shadcn
Manages shadcn components and projects — adding, searching, fixing, debugging, styling, and composing UI, including chat interfaces. Provides project context, component docs, and usage examples. Applies when working with shadcn/ui, component registries, presets, --preset codes, or any project with a components.json file. Also triggers for "shadcn init", "create an app with --preset", "switch to --preset", and for building a design system or applying a DESIGN.md or brand spec to shadcn/ui.