[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"skill:01M7ASZD7RXR391RF0V758ETVW":3,"skill-same:01M7ASZD7RXR391RF0V758ETVW":48},{"skillNo":4,"name":5,"nameZh":6,"description":7,"descriptionZh":6,"repositoryFullName":8,"ownerLogin":9,"ownerAvatarUrl":10,"ownerAccountNo":11,"ownerDisplayName":12,"repositoryNo":13,"starsCount":14,"licenseSpdxId":15,"licenseFileUrl":6,"sourceHtmlUrl":16,"categories":17,"keywords":18,"publishedAt":19,"linkOnly":20,"markdownContent":21,"markdownBody":22,"frontMatter":23,"refName":24,"commitSha":25,"skillDirectory":26,"forksCount":27,"repositoryHtmlUrl":28,"repositoryHomepageUrl":29,"ownerHtmlUrl":30,"ownerBlogUrl":31,"ownerDescription":32,"updatedAt":33,"install":34,"resources":47},"01M7ASZD7RXR391RF0V758ETVW","shop-reference",null,"Use when correcting a woodworking or metalworking misconception, looking up a speed, feed, moisture content, drill or tap size, or fit tolerance, finding the resources, or needing a quick-reference picker — plus the current state of US table saw safety regulation and welding fume exposure control. Companion to the other wood and metal shop skills.","the-vibey-project\u002Fvibey","the-vibey-project","https:\u002F\u002Favatars.githubusercontent.com\u002Fu\u002F329298758?v=4","01M7AJHGZ9722CTJ4JNQZVRH0Q","the vibey project","01M7AJHGZVMG2K7TGXQ6XFHVG3",5,"MIT","https:\u002F\u002Fgithub.com\u002Fthe-vibey-project\u002Fvibey\u002Fblob\u002Fdevelop\u002Fsrc\u002Fvibey_tools\u002Fskills\u002Fplugins\u002Fworking-with-wood-and-metal\u002Fskills\u002Fshop-reference\u002FSKILL.md",[],[],"2026-11-15 14:19:17",false,"---\nname: shop-reference\ndescription: \"Use when correcting a woodworking or metalworking misconception, looking up a speed, feed, moisture content, drill or tap size, or fit tolerance, finding the resources, or needing a quick-reference picker — plus the current state of US table saw safety regulation and welding fume exposure control. Companion to the other wood and metal shop skills.\"\n---\n\n# Wood and Metal Shop Craft: What's Live, Misconceptions, Numbers, and Resources\n\n> **Part 5 of 5** of the *Working with Wood and Metal* reference (plugin `working-with-wood-and-metal`), covering §27–§32. Sibling skills: `shop-materials-safety-reading-wood-and-stock` (§0–§4), `shop-woodworking-tools-sharpening-joinery-and-finishing` (§5–§12), `shop-metalwork-cutting-drilling-and-machining` (§13–§18), `shop-welding-forging-heat-treatment-and-shop-setup` (§19–§26). Section numbers are shared across the set; a reference written as §N → `skill` points into that sibling skill.\n>\n> **Currency:** The craft is centuries old. Two areas moved. See §27 for US table saw safety regulation, and welding fume exposure control.\n\n> **⚠️ Two materials that punish opposite mistakes.** ⚠️ **Wood MOVES forever and forgives\n> imprecision; metal is dimensionally stable and forgives nothing.** **⚠️ Wood is worked\n> with the grain and cut fast; metal is worked against resistance and cut slowly.**\n> **The habits that make you good at one will actively hurt you at the other.**\n>\n> **Complements a manufacturing reference (industrial process and tolerancing), a\n> materials\u002Ffurniture reference (wood movement and finishing at the design level), and a\n> thermodynamics reference (heat treatment physics).**\n>\n> **⚠️ SAFETY IS §2 → `shop-materials-safety-reading-wood-and-stock` AND IT IS FIRST FOR A REASON.** ⚠️ **This document describes techniques;\n> it does not substitute for supervised instruction on machinery. The table saw, angle\n> grinder and welding arc each injure large numbers of people every year, and the\n> mechanisms are specific and learnable.**\n>\n> **⚠️ GOTCHA** boxes mark the habits that cause injuries and the received wisdom that's\n> wrong.\n>\n> **The three ideas that organize this document:**\n> 1. **⚠️ SHARP IS SAFE** (§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`). **A dull tool requires force, force removes control, and\n>    loss of control is how people get hurt. Sharpening is not a side skill — it's the\n>    gateway to everything else.**\n> 2. **⚠️ The material is not neutral** (§3 → `shop-materials-safety-reading-wood-and-stock`, §14 → `shop-metalwork-cutting-drilling-and-machining`). **Wood grain direction, and metal's\n>    heat and work-hardening behaviour, determine technique. Fighting the material is\n>    the definition of doing it wrong.**\n> 3. **⚠️ The invisible hazards are the ones that get you** (§2 → `shop-materials-safety-reading-wood-and-stock`, §26 → `shop-welding-forging-heat-treatment-and-shop-setup`, §27.2). **Wood dust\n>    and welding fume are classified carcinogens with no warning symptoms — and they're\n>    the risks hobbyists systematically ignore in favour of the dramatic ones.**\n\n---\n\n## §27. What's Live — verified August 2026\n\n### 27.1 ⚠️ US table saw regulation: a reversal\n**⚠️ Directly relevant to §9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, and the outcome went the opposite way to what the sector\nexpected.**\n\n- **⚠️ The background**: **SawStop petitioned the CPSC in 2003 for a performance standard on\n  blade-contact injuries.** ⚠️ **A 2017 proposed rule, supplemented in 2023, would have\n  required table saws to limit the depth of cut to 3.5 mm or less when a test probe\n  contacts the spinning blade at a radial approach rate of 1 m\u002Fs.** ⚠️ **The 3.5 mm figure\n  derives from UL's identification of 4 mm as the threshold between simple and severe\n  finger lacerations, minus 0.5 mm for the epidermis — below it, cuts should not damage\n  nerves or arteries requiring surgery.**\n- **⚠️ CPSC testing showed the standard was achievable**: ⚠️ **SawStop saws produced depths\n  of cut from 1.5 to 2.8 mm and Bosch REAXX from about 1.8 to 2.5 mm.**\n- **⚠️ THE REVERSAL: on 20 August 2025 the CPSC announced it would WITHDRAW the rule**,\n  ⚠️ **as part of dropping \"several existing and pending rulemakings that no longer align\n  with agency priorities, and which fail to advance safety\" — with the table saw standard\n  leading the list of six.**\n\n> **⚠️ GOTCHA — the patent dimension is why this was never a simple safety question, and\n> it's worth understanding before taking a side.** ⚠️ **Critics argued the rule would\n> effectively mandate a patented technology, creating a government-mandated monopoly;\n> SawStop sued Bosch, and in 2017 the ITC prohibited Bosch from importing REAXX saws for\n> infringing SawStop patents — removing the main alternative from the US market.**\n> ⚠️ **SawStop also filed suit against Felder in 2024 over the alternative technology CPSC\n> had cited.** **⚠️ A bipartisan bill was introduced to bar any such rule until at least\n> five years after the relevant patents expire, which one analysis calculated could mean\n> 2043.**\n> **⚠️ Note the counter-argument is equally concrete: CPSC estimated the rule would have\n> prevented or mitigated over 49,000 injuries annually, and its own 2019 analysis found\n> NO reduction in table saw injuries from 2010 to 2018 despite the voluntary modular\n> blade guard standard adopted in 2010.**\n\n**⚠️ The practical upshot for anyone with a table saw**: ⚠️ **AIM technology remains\navailable and voluntary rather than required, it is not being retrofitted or mandated,\nand — importantly — **it addresses BLADE CONTACT, not KICKBACK**.** ⚠️ **The riving knife,\npush stick and stance in §9 → `shop-woodworking-tools-sharpening-joinery-and-finishing` remain the controls that matter, and they cost nothing.**\n**⚠️ Scale note: CPSC estimated roughly 33,400 emergency-department-treated table saw\ninjuries in 2015, and around 54,800 medically treated blade-contact injuries annually in\nearlier analysis.**\n\n### 27.2 ⚠️ Welding fume: the numbers behind the ventilation advice\n**⚠️ §19 → `shop-welding-forging-heat-treatment-and-shop-setup`'s PPE paragraph, quantified — and the figures explain why casual stainless welding\nin an unventilated garage is a genuinely bad idea.**\n\n- **⚠️ Hexavalent chromium — Cr(VI) — forms when arc welding heats chromium-bearing metal,\n  principally STAINLESS STEEL.** ⚠️ **IARC classifies all hexavalent chromium compounds as\n  Group 1 carcinogens.**\n- **⚠️ The OSHA permissible exposure limit is 5 µg\u002Fm³ as an 8-hour time-weighted average\n  (29 CFR 1910.1026), with an ACTION LEVEL of 2.5 µg\u002Fm³ that triggers monitoring and\n  medical surveillance.** ⚠️ **That PEL is a tenfold reduction from the previous limit and\n  is reported as 1,000 times lower than the PEL for general welding fume.**\n  ⚠️ **NIOSH's recommended exposure limit is reported at 0.2 µg\u002Fm³ — 25× more protective\n  than OSHA's.**\n- **⚠️ The exposure risk is not theoretical.** ⚠️ **An estimated 558,000 US workers are\n  exposed to airborne Cr(VI); welders with high exposure are reported to face an 85%\n  increased lung cancer risk, and stainless steel welders nearly double the general\n  population's risk per meta-analysis.**\n- **⚠️ How fast you reach it**: ⚠️ **one industry source quotes an air quality specialist\n  saying that MIG or stick welding on stainless for more than about ten minutes will\n  overexpose you — \"the limit is that low.\"** ⚠️ **Treat that as illustrative rather than\n  precise, but the order of magnitude is the point.**\n\n> **⚠️ GOTCHA — the control hierarchy applies here exactly as in §2 → `shop-materials-safety-reading-wood-and-stock`, and OSHA is explicit\n> about the order.** ⚠️ **LOCAL EXHAUST VENTILATION at the source is the primary engineering\n> control, supplemented by general dilution ventilation — and OSHA has determined\n> engineering and work-practice controls must be the PRIMARY means, not respirators.**\n> ⚠️ **General dilution ventilation \"cannot replace LEV for high-hazard operations.\"**\n> **⚠️ Note also a documented trap: the safety data sheet for a chromium-containing alloy\n> will list chromium in its neutral state, which is NOT a carcinogen — the Cr(VI) is\n> CREATED by the arc.** ⚠️ **So an SDS that looks clean does not mean the operation is.**\n\n**⚠️ The other fume hazards in the same breath**: ⚠️ **manganese (neurological effects,\nwhich is why ACGIH's value is set to mitigate brain damage), nickel, and iron oxide\n(⚠️ OSHA PEL 10 mg\u002Fm³ — the least toxic common case, which is why mild steel is the\ncomparatively benign scenario).** ⚠️ **European practice sets a general respirable dust\nlimit of 1.25 mg\u002Fm³ with 0.010 mg\u002Fm³ for Cr(VI) and 0.006 mg\u002Fm³ for nickel compounds\n(TRGS 900), and applies a MINIMIZATION principle for carcinogens — exposure reduced as far\nas technically possible even when the limit is formally met.**\n**⚠️ For the hobbyist, the honest translation**: ⚠️ **weld mild steel with your head out of\nthe plume and a fan drawing across; ⚠️ do not weld stainless or galvanized without real\nextraction and respiratory protection; and treat \"it's only a short job\" as exactly the\nreasoning that produces cumulative exposure.**\n\n---\n\n## §28. Misconceptions\n\n| Misconception | Correction |\n|---|---|\n| A sharp tool is more dangerous | ⚠️ **Dull needs force; force loses control** (§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Sharpening is an advanced skill | ⚠️ **It's the prerequisite for everything** (§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Hardwood means hard | ⚠️ **Botanical, not mechanical. Balsa is a hardwood** (§3 → `shop-materials-safety-reading-wood-and-stock`) |\n| Kiln-dried wood is stable | ⚠️ **It moves with humidity forever** (§3 → `shop-materials-safety-reading-wood-and-stock`) |\n| Measure carefully and it'll fit | ⚠️ **TRANSFER instead of measuring where you can** (§5 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Use the fence and mitre gauge together | ⚠️ **Traps the offcut. Classic kickback cause** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| The blade guard is the main protection | ⚠️ **The RIVING KNIFE prevents kickback** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Flesh-detection makes a saw safe | ⚠️ **It addresses contact, not kickback** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §27.1) |\n| Clamp harder to close the joint | ⚠️ **A joint needing force is cut wrong** (§11 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Glue squeeze-out will sand off | ⚠️ **It blocks finish. Remove it wet** (§11 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Gloves protect you around machines | ⚠️ **NEVER near rotating machinery** (§2 → `shop-materials-safety-reading-wood-and-stock`, §18 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Push harder to cut metal faster | ⚠️ **Rubbing work-hardens; then nothing cuts** (§14 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Cutting fluid is optional | ⚠️ **It's cooling. Heat destroys edges and tempers** (§14 → `shop-metalwork-cutting-drilling-and-machining`) |\n| More thread engagement is stronger | ⚠️ **~75% is standard; more just snaps taps** (§17 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Mild steel can be hardened | ⚠️ **Not enough carbon** (§22 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Hardened steel is ready to use | ⚠️ **Brittle until tempered. Never skip it** (§22 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| A cutting disc can grind a little | ⚠️ **Side loading shatters it** (§2 → `shop-materials-safety-reading-wood-and-stock`, §16 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Arc eye happens immediately | ⚠️ **Symptoms hours later. Bystanders too** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| A dust mask handles welding fume | ⚠️ **It doesn't. Extraction first** (§26 → `shop-welding-forging-heat-treatment-and-shop-setup`, §27.2) |\n| The SDS shows no carcinogen, so it's fine | ⚠️ **The arc CREATES Cr(VI)** (§27.2) |\n| A shop vac controls wood dust | ⚠️ **It misses the dangerous fine fraction** (§26 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Wood dust is a nuisance | ⚠️ **Classified carcinogen; hardwood especially** (§2 → `shop-materials-safety-reading-wood-and-stock`) |\n| Welding fixes a bad fit | ⚠️ **Fit-up determines weld quality** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Weld it all at once for strength | ⚠️ **Distortion. Tack and stagger** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n\n---\n\n## §29. Numbers\n\n```\n⚠️ Wood MC for heated interiors  ⚠️ ~6–8%\n⚠️ Tangential movement  ⚠️ roughly 2× radial\n⚠️ Sharpening angles  ⚠️ ~25° primary, ~30° secondary (bench chisels)\n⚠️ Hacksaw  ⚠️ minimum 3 teeth in the cut\n⚠️ Tap drill  ⚠️ ~75% thread engagement standard\n⚠️ Brazing vs soldering  ⚠️ ~450°C dividing line\n⚠️ Caliper realistic resolution  ~0.05 mm · micrometer ~0.01 mm\n⚠️ Table saw AIM standard (proposed)  ⚠️ ≤3.5 mm depth of cut at 1 m\u002Fs\n⚠️ Measured AIM performance  ⚠️ SawStop 1.5–2.8 mm · Bosch 1.8–2.5 mm\n⚠️ CPSC rule withdrawn  ⚠️ 20 August 2025\n⚠️ Table saw injuries  ⚠️ ~33,400 ED-treated (2015); ~49,000+ the rule\n                       would have prevented or mitigated annually\n⚠️ Cr(VI) OSHA PEL  ⚠️ 5 µg\u002Fm³ 8-h TWA · action level 2.5 µg\u002Fm³\n⚠️ Cr(VI) NIOSH REL  ⚠️ 0.2 µg\u002Fm³ (25× stricter)\n⚠️ Iron oxide fume PEL  10 mg\u002Fm³ — ⚠️ 1,000× higher than Cr(VI)\n⚠️ US workers exposed to Cr(VI)  ⚠️ ~558,000\n⚠️ Lung cancer risk  ⚠️ reported +85% in high-exposure welders\n```\n\n---\n\n## §30. Learning and Resources\n\n| Source | Why |\n|---|---|\n| **A local class or makerspace** | ⚠️ **Machinery genuinely needs supervised first use** |\n| **Hoadley, *Understanding Wood*** | ⚠️ **§3 → `shop-materials-safety-reading-wood-and-stock`. The book on wood as a material** |\n| **Sellers \u002F Schwarz \u002F Cosman (hand tools)** | ⚠️ **§6–§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, and free video is genuinely good here** |\n| **Fine Woodworking archive** | Decades of tested technique |\n| **Machinery's Handbook** | ⚠️ **§15–§25 → `shop-metalwork-cutting-drilling-and-machining`, `shop-welding-forging-heat-treatment-and-shop-setup`. The trade's single reference** |\n| **Sparey, *The Amateur's Lathe*** | ⚠️ **§18 → `shop-metalwork-cutting-drilling-and-machining`, classic and still excellent** |\n| **Hall \u002F Workshop Practice Series** | ⚠️ **Small, cheap, focused volumes** |\n| **AWS welding handbooks \u002F *Welding For Dummies*** | §19 → `shop-welding-forging-heat-treatment-and-shop-setup` at both ends |\n| **Lorena Bull \u002F blacksmithing guilds** | §21 → `shop-welding-forging-heat-treatment-and-shop-setup` |\n| **OSHA 1910.1026 and CPL 02-02-074** | ⚠️ **§27.2, primary** |\n| **CPSC docket CPSC-2011-0074** | ⚠️ **§27.1, primary** |\n| **Manufacturer manuals** | ⚠️ **Actually read them; the guards exist for reasons** |\n\n---\n\n## §31. Quick Reference\n\n### 31.1 Picker\n| Problem | Where |\n|---|---|\n| Plane tears out the grain | ⚠️ **Wrong direction, or use a scraper** (§3 → `shop-materials-safety-reading-wood-and-stock`, §6 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Nothing fits despite careful measuring | ⚠️ **Four-square first; transfer, don't measure** (§4 → `shop-materials-safety-reading-wood-and-stock`, §5 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Joint too tight to assemble | ⚠️ **It'll split when glued. Pare it** (§10 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §11 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Finish has pale patches | ⚠️ **Glue residue** (§11 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Saw burns the wood | ⚠️ **Dull blade, slow feed, or misaligned fence** (§8 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Workpiece thrown back at me | ⚠️ **Kickback. Riving knife, stance, technique** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Drill wanders | ⚠️ **Centre punch** (§17 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Tap snapped | ⚠️ **Too much engagement, no fluid, not square** (§17 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Tool stops cutting stainless | ⚠️ **Work-hardened. Sharp tool, positive feed** (§13 → `shop-metalwork-cutting-drilling-and-machining`, §14 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Machined part moved after cutting | ⚠️ **Residual stress. Rough, rest, finish** (§14 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Chatter on the lathe | ⚠️ **Rigidity, centre height, feed** (§18 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Weld is porous | ⚠️ **Contamination or lost shielding gas** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Work distorted after welding | ⚠️ **Shrinkage. Tack, stagger, clamp** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Braze won't flow | ⚠️ **Not hot enough, wrong flux, or gap too wide** (§20 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Hardened part cracked | ⚠️ **Wrong quench, or never tempered** (§22 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Eyes gritty hours after welding | ⚠️ **Arc eye. Medical attention** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n\n### 31.2 Before you start the machine\n- [ ] ⚠️ **Eye protection on; hearing protection for anything loud** (§2 → `shop-materials-safety-reading-wood-and-stock`)\n- [ ] ⚠️ **No gloves, loose sleeves, jewellery; hair tied** (§2 → `shop-materials-safety-reading-wood-and-stock`)\n- [ ] Guards fitted; ⚠️ **riving knife in place** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`)\n- [ ] ⚠️ **Workpiece clamped or properly supported** (§8 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §17 → `shop-metalwork-cutting-drilling-and-machining`)\n- [ ] Blade\u002Fbit sharp and correct for the material (§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §8 → `shop-woodworking-tools-sharpening-joinery-and-finishing`)\n- [ ] ⚠️ **Push stick within reach; hands' path planned** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`)\n- [ ] ⚠️ **Standing out of the line of fire** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`)\n- [ ] Extraction running; ⚠️ **respirator if fine dust or fume** (§26 → `shop-welding-forging-heat-treatment-and-shop-setup`)\n- [ ] Chuck key removed (§18 → `shop-metalwork-cutting-drilling-and-machining`)\n- [ ] ⚠️ **Not tired, not rushing, not distracted** (§2 → `shop-materials-safety-reading-wood-and-stock`)\n\n---\n\n## §32. Method\n\n**§1–§26 → `shop-materials-safety-reading-wood-and-stock`, `shop-woodworking-tools-sharpening-joinery-and-finishing`, `shop-metalwork-cutting-drilling-and-machining`, `shop-welding-forging-heat-treatment-and-shop-setup` rests on established craft practice and materials science** — **grain behaviour and\nwood movement, sharpening geometry, the welding process families, heat treatment\nmetallurgy, and standard machine safety practice.** ⚠️ **None of it needed verification;\ntempering colours and kickback mechanics have not changed.**\n\n**Two searches were run in August 2026**, on **US table saw regulation** and **welding fume\nexposure** — ⚠️ **both chosen because they are safety topics where the practical guidance\ndepends on facts that recently moved, and where hobbyists most commonly rely on outdated\nor vibes-based information.**\n\n**Confidence.** **High** in §2 → `shop-materials-safety-reading-wood-and-stock`, §7 → `shop-woodworking-tools-sharpening-joinery-and-finishing` and §9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, which are the sections I'd most want read.\n⚠️ **\"Sharp is safe\" is the single most useful principle here and it is counterintuitive to\nbeginners.** ⚠️ **§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`'s kickback mechanism — specifically that using the fence and mitre\ngauge together traps the offcut, and that the riving knife rather than the guard is the\neffective control — prevents a specific, common, serious injury.** **And §2 → `shop-materials-safety-reading-wood-and-stock`'s point that\nhobbyists reach for PPE (the weakest control) while ignoring extraction is the pattern\nworth breaking.**\n\n**High** on §27.1's chronology, which comes from the Federal Register, CPSC documents and\ntrade reporting: ⚠️ **the 3.5 mm\u002F1 m\u002Fs performance criterion and its derivation from UL's\n4 mm laceration threshold, the measured AIM performance figures, and the withdrawal\nannounced 20 August 2025.** ⚠️ **I've deliberately given BOTH the patent-monopoly objection\nand the injury-prevention counter-argument, because this was never a clean safety-versus-\nindustry question — the Power Tool Institute source is an industry body and the Consumer\nReports source is an advocacy organization, and I've identified both inline rather than\npresenting either as neutral.**\n\n**High** on §27.2's regulatory numbers, which trace to OSHA's own standard and\ninterpretations: ⚠️ **the 5 µg\u002Fm³ PEL and 2.5 µg\u002Fm³ action level under 29 CFR 1910.1026,\nIARC Group 1 classification, and OSHA's determination that engineering controls must be\nthe primary means.** ⚠️ **The epidemiological figures (558,000 exposed workers, +85% lung\ncancer risk, doubled risk in stainless welders) come from industrial-hygiene vendors\nciting research rather than from papers I read directly, and I've marked them as\nreported.** ⚠️ **The \"ten minutes on stainless overexposes you\" quote is from a single\nspecialist in a vendor publication and I've explicitly flagged it as illustrative — the\norder of magnitude is the useful part, not the number.**\n","# Wood and Metal Shop Craft: What's Live, Misconceptions, Numbers, and Resources\n\n> **Part 5 of 5** of the *Working with Wood and Metal* reference (plugin `working-with-wood-and-metal`), covering §27–§32. Sibling skills: `shop-materials-safety-reading-wood-and-stock` (§0–§4), `shop-woodworking-tools-sharpening-joinery-and-finishing` (§5–§12), `shop-metalwork-cutting-drilling-and-machining` (§13–§18), `shop-welding-forging-heat-treatment-and-shop-setup` (§19–§26). Section numbers are shared across the set; a reference written as §N → `skill` points into that sibling skill.\n>\n> **Currency:** The craft is centuries old. Two areas moved. See §27 for US table saw safety regulation, and welding fume exposure control.\n\n> **⚠️ Two materials that punish opposite mistakes.** ⚠️ **Wood MOVES forever and forgives\n> imprecision; metal is dimensionally stable and forgives nothing.** **⚠️ Wood is worked\n> with the grain and cut fast; metal is worked against resistance and cut slowly.**\n> **The habits that make you good at one will actively hurt you at the other.**\n>\n> **Complements a manufacturing reference (industrial process and tolerancing), a\n> materials\u002Ffurniture reference (wood movement and finishing at the design level), and a\n> thermodynamics reference (heat treatment physics).**\n>\n> **⚠️ SAFETY IS §2 → `shop-materials-safety-reading-wood-and-stock` AND IT IS FIRST FOR A REASON.** ⚠️ **This document describes techniques;\n> it does not substitute for supervised instruction on machinery. The table saw, angle\n> grinder and welding arc each injure large numbers of people every year, and the\n> mechanisms are specific and learnable.**\n>\n> **⚠️ GOTCHA** boxes mark the habits that cause injuries and the received wisdom that's\n> wrong.\n>\n> **The three ideas that organize this document:**\n> 1. **⚠️ SHARP IS SAFE** (§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`). **A dull tool requires force, force removes control, and\n>    loss of control is how people get hurt. Sharpening is not a side skill — it's the\n>    gateway to everything else.**\n> 2. **⚠️ The material is not neutral** (§3 → `shop-materials-safety-reading-wood-and-stock`, §14 → `shop-metalwork-cutting-drilling-and-machining`). **Wood grain direction, and metal's\n>    heat and work-hardening behaviour, determine technique. Fighting the material is\n>    the definition of doing it wrong.**\n> 3. **⚠️ The invisible hazards are the ones that get you** (§2 → `shop-materials-safety-reading-wood-and-stock`, §26 → `shop-welding-forging-heat-treatment-and-shop-setup`, §27.2). **Wood dust\n>    and welding fume are classified carcinogens with no warning symptoms — and they're\n>    the risks hobbyists systematically ignore in favour of the dramatic ones.**\n\n---\n\n## §27. What's Live — verified August 2026\n\n### 27.1 ⚠️ US table saw regulation: a reversal\n**⚠️ Directly relevant to §9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, and the outcome went the opposite way to what the sector\nexpected.**\n\n- **⚠️ The background**: **SawStop petitioned the CPSC in 2003 for a performance standard on\n  blade-contact injuries.** ⚠️ **A 2017 proposed rule, supplemented in 2023, would have\n  required table saws to limit the depth of cut to 3.5 mm or less when a test probe\n  contacts the spinning blade at a radial approach rate of 1 m\u002Fs.** ⚠️ **The 3.5 mm figure\n  derives from UL's identification of 4 mm as the threshold between simple and severe\n  finger lacerations, minus 0.5 mm for the epidermis — below it, cuts should not damage\n  nerves or arteries requiring surgery.**\n- **⚠️ CPSC testing showed the standard was achievable**: ⚠️ **SawStop saws produced depths\n  of cut from 1.5 to 2.8 mm and Bosch REAXX from about 1.8 to 2.5 mm.**\n- **⚠️ THE REVERSAL: on 20 August 2025 the CPSC announced it would WITHDRAW the rule**,\n  ⚠️ **as part of dropping \"several existing and pending rulemakings that no longer align\n  with agency priorities, and which fail to advance safety\" — with the table saw standard\n  leading the list of six.**\n\n> **⚠️ GOTCHA — the patent dimension is why this was never a simple safety question, and\n> it's worth understanding before taking a side.** ⚠️ **Critics argued the rule would\n> effectively mandate a patented technology, creating a government-mandated monopoly;\n> SawStop sued Bosch, and in 2017 the ITC prohibited Bosch from importing REAXX saws for\n> infringing SawStop patents — removing the main alternative from the US market.**\n> ⚠️ **SawStop also filed suit against Felder in 2024 over the alternative technology CPSC\n> had cited.** **⚠️ A bipartisan bill was introduced to bar any such rule until at least\n> five years after the relevant patents expire, which one analysis calculated could mean\n> 2043.**\n> **⚠️ Note the counter-argument is equally concrete: CPSC estimated the rule would have\n> prevented or mitigated over 49,000 injuries annually, and its own 2019 analysis found\n> NO reduction in table saw injuries from 2010 to 2018 despite the voluntary modular\n> blade guard standard adopted in 2010.**\n\n**⚠️ The practical upshot for anyone with a table saw**: ⚠️ **AIM technology remains\navailable and voluntary rather than required, it is not being retrofitted or mandated,\nand — importantly — **it addresses BLADE CONTACT, not KICKBACK**.** ⚠️ **The riving knife,\npush stick and stance in §9 → `shop-woodworking-tools-sharpening-joinery-and-finishing` remain the controls that matter, and they cost nothing.**\n**⚠️ Scale note: CPSC estimated roughly 33,400 emergency-department-treated table saw\ninjuries in 2015, and around 54,800 medically treated blade-contact injuries annually in\nearlier analysis.**\n\n### 27.2 ⚠️ Welding fume: the numbers behind the ventilation advice\n**⚠️ §19 → `shop-welding-forging-heat-treatment-and-shop-setup`'s PPE paragraph, quantified — and the figures explain why casual stainless welding\nin an unventilated garage is a genuinely bad idea.**\n\n- **⚠️ Hexavalent chromium — Cr(VI) — forms when arc welding heats chromium-bearing metal,\n  principally STAINLESS STEEL.** ⚠️ **IARC classifies all hexavalent chromium compounds as\n  Group 1 carcinogens.**\n- **⚠️ The OSHA permissible exposure limit is 5 µg\u002Fm³ as an 8-hour time-weighted average\n  (29 CFR 1910.1026), with an ACTION LEVEL of 2.5 µg\u002Fm³ that triggers monitoring and\n  medical surveillance.** ⚠️ **That PEL is a tenfold reduction from the previous limit and\n  is reported as 1,000 times lower than the PEL for general welding fume.**\n  ⚠️ **NIOSH's recommended exposure limit is reported at 0.2 µg\u002Fm³ — 25× more protective\n  than OSHA's.**\n- **⚠️ The exposure risk is not theoretical.** ⚠️ **An estimated 558,000 US workers are\n  exposed to airborne Cr(VI); welders with high exposure are reported to face an 85%\n  increased lung cancer risk, and stainless steel welders nearly double the general\n  population's risk per meta-analysis.**\n- **⚠️ How fast you reach it**: ⚠️ **one industry source quotes an air quality specialist\n  saying that MIG or stick welding on stainless for more than about ten minutes will\n  overexpose you — \"the limit is that low.\"** ⚠️ **Treat that as illustrative rather than\n  precise, but the order of magnitude is the point.**\n\n> **⚠️ GOTCHA — the control hierarchy applies here exactly as in §2 → `shop-materials-safety-reading-wood-and-stock`, and OSHA is explicit\n> about the order.** ⚠️ **LOCAL EXHAUST VENTILATION at the source is the primary engineering\n> control, supplemented by general dilution ventilation — and OSHA has determined\n> engineering and work-practice controls must be the PRIMARY means, not respirators.**\n> ⚠️ **General dilution ventilation \"cannot replace LEV for high-hazard operations.\"**\n> **⚠️ Note also a documented trap: the safety data sheet for a chromium-containing alloy\n> will list chromium in its neutral state, which is NOT a carcinogen — the Cr(VI) is\n> CREATED by the arc.** ⚠️ **So an SDS that looks clean does not mean the operation is.**\n\n**⚠️ The other fume hazards in the same breath**: ⚠️ **manganese (neurological effects,\nwhich is why ACGIH's value is set to mitigate brain damage), nickel, and iron oxide\n(⚠️ OSHA PEL 10 mg\u002Fm³ — the least toxic common case, which is why mild steel is the\ncomparatively benign scenario).** ⚠️ **European practice sets a general respirable dust\nlimit of 1.25 mg\u002Fm³ with 0.010 mg\u002Fm³ for Cr(VI) and 0.006 mg\u002Fm³ for nickel compounds\n(TRGS 900), and applies a MINIMIZATION principle for carcinogens — exposure reduced as far\nas technically possible even when the limit is formally met.**\n**⚠️ For the hobbyist, the honest translation**: ⚠️ **weld mild steel with your head out of\nthe plume and a fan drawing across; ⚠️ do not weld stainless or galvanized without real\nextraction and respiratory protection; and treat \"it's only a short job\" as exactly the\nreasoning that produces cumulative exposure.**\n\n---\n\n## §28. Misconceptions\n\n| Misconception | Correction |\n|---|---|\n| A sharp tool is more dangerous | ⚠️ **Dull needs force; force loses control** (§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Sharpening is an advanced skill | ⚠️ **It's the prerequisite for everything** (§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Hardwood means hard | ⚠️ **Botanical, not mechanical. Balsa is a hardwood** (§3 → `shop-materials-safety-reading-wood-and-stock`) |\n| Kiln-dried wood is stable | ⚠️ **It moves with humidity forever** (§3 → `shop-materials-safety-reading-wood-and-stock`) |\n| Measure carefully and it'll fit | ⚠️ **TRANSFER instead of measuring where you can** (§5 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Use the fence and mitre gauge together | ⚠️ **Traps the offcut. Classic kickback cause** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| The blade guard is the main protection | ⚠️ **The RIVING KNIFE prevents kickback** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Flesh-detection makes a saw safe | ⚠️ **It addresses contact, not kickback** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §27.1) |\n| Clamp harder to close the joint | ⚠️ **A joint needing force is cut wrong** (§11 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Glue squeeze-out will sand off | ⚠️ **It blocks finish. Remove it wet** (§11 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Gloves protect you around machines | ⚠️ **NEVER near rotating machinery** (§2 → `shop-materials-safety-reading-wood-and-stock`, §18 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Push harder to cut metal faster | ⚠️ **Rubbing work-hardens; then nothing cuts** (§14 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Cutting fluid is optional | ⚠️ **It's cooling. Heat destroys edges and tempers** (§14 → `shop-metalwork-cutting-drilling-and-machining`) |\n| More thread engagement is stronger | ⚠️ **~75% is standard; more just snaps taps** (§17 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Mild steel can be hardened | ⚠️ **Not enough carbon** (§22 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Hardened steel is ready to use | ⚠️ **Brittle until tempered. Never skip it** (§22 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| A cutting disc can grind a little | ⚠️ **Side loading shatters it** (§2 → `shop-materials-safety-reading-wood-and-stock`, §16 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Arc eye happens immediately | ⚠️ **Symptoms hours later. Bystanders too** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| A dust mask handles welding fume | ⚠️ **It doesn't. Extraction first** (§26 → `shop-welding-forging-heat-treatment-and-shop-setup`, §27.2) |\n| The SDS shows no carcinogen, so it's fine | ⚠️ **The arc CREATES Cr(VI)** (§27.2) |\n| A shop vac controls wood dust | ⚠️ **It misses the dangerous fine fraction** (§26 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Wood dust is a nuisance | ⚠️ **Classified carcinogen; hardwood especially** (§2 → `shop-materials-safety-reading-wood-and-stock`) |\n| Welding fixes a bad fit | ⚠️ **Fit-up determines weld quality** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Weld it all at once for strength | ⚠️ **Distortion. Tack and stagger** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n\n---\n\n## §29. Numbers\n\n```\n⚠️ Wood MC for heated interiors  ⚠️ ~6–8%\n⚠️ Tangential movement  ⚠️ roughly 2× radial\n⚠️ Sharpening angles  ⚠️ ~25° primary, ~30° secondary (bench chisels)\n⚠️ Hacksaw  ⚠️ minimum 3 teeth in the cut\n⚠️ Tap drill  ⚠️ ~75% thread engagement standard\n⚠️ Brazing vs soldering  ⚠️ ~450°C dividing line\n⚠️ Caliper realistic resolution  ~0.05 mm · micrometer ~0.01 mm\n⚠️ Table saw AIM standard (proposed)  ⚠️ ≤3.5 mm depth of cut at 1 m\u002Fs\n⚠️ Measured AIM performance  ⚠️ SawStop 1.5–2.8 mm · Bosch 1.8–2.5 mm\n⚠️ CPSC rule withdrawn  ⚠️ 20 August 2025\n⚠️ Table saw injuries  ⚠️ ~33,400 ED-treated (2015); ~49,000+ the rule\n                       would have prevented or mitigated annually\n⚠️ Cr(VI) OSHA PEL  ⚠️ 5 µg\u002Fm³ 8-h TWA · action level 2.5 µg\u002Fm³\n⚠️ Cr(VI) NIOSH REL  ⚠️ 0.2 µg\u002Fm³ (25× stricter)\n⚠️ Iron oxide fume PEL  10 mg\u002Fm³ — ⚠️ 1,000× higher than Cr(VI)\n⚠️ US workers exposed to Cr(VI)  ⚠️ ~558,000\n⚠️ Lung cancer risk  ⚠️ reported +85% in high-exposure welders\n```\n\n---\n\n## §30. Learning and Resources\n\n| Source | Why |\n|---|---|\n| **A local class or makerspace** | ⚠️ **Machinery genuinely needs supervised first use** |\n| **Hoadley, *Understanding Wood*** | ⚠️ **§3 → `shop-materials-safety-reading-wood-and-stock`. The book on wood as a material** |\n| **Sellers \u002F Schwarz \u002F Cosman (hand tools)** | ⚠️ **§6–§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, and free video is genuinely good here** |\n| **Fine Woodworking archive** | Decades of tested technique |\n| **Machinery's Handbook** | ⚠️ **§15–§25 → `shop-metalwork-cutting-drilling-and-machining`, `shop-welding-forging-heat-treatment-and-shop-setup`. The trade's single reference** |\n| **Sparey, *The Amateur's Lathe*** | ⚠️ **§18 → `shop-metalwork-cutting-drilling-and-machining`, classic and still excellent** |\n| **Hall \u002F Workshop Practice Series** | ⚠️ **Small, cheap, focused volumes** |\n| **AWS welding handbooks \u002F *Welding For Dummies*** | §19 → `shop-welding-forging-heat-treatment-and-shop-setup` at both ends |\n| **Lorena Bull \u002F blacksmithing guilds** | §21 → `shop-welding-forging-heat-treatment-and-shop-setup` |\n| **OSHA 1910.1026 and CPL 02-02-074** | ⚠️ **§27.2, primary** |\n| **CPSC docket CPSC-2011-0074** | ⚠️ **§27.1, primary** |\n| **Manufacturer manuals** | ⚠️ **Actually read them; the guards exist for reasons** |\n\n---\n\n## §31. Quick Reference\n\n### 31.1 Picker\n| Problem | Where |\n|---|---|\n| Plane tears out the grain | ⚠️ **Wrong direction, or use a scraper** (§3 → `shop-materials-safety-reading-wood-and-stock`, §6 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Nothing fits despite careful measuring | ⚠️ **Four-square first; transfer, don't measure** (§4 → `shop-materials-safety-reading-wood-and-stock`, §5 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Joint too tight to assemble | ⚠️ **It'll split when glued. Pare it** (§10 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §11 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Finish has pale patches | ⚠️ **Glue residue** (§11 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Saw burns the wood | ⚠️ **Dull blade, slow feed, or misaligned fence** (§8 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Workpiece thrown back at me | ⚠️ **Kickback. Riving knife, stance, technique** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`) |\n| Drill wanders | ⚠️ **Centre punch** (§17 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Tap snapped | ⚠️ **Too much engagement, no fluid, not square** (§17 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Tool stops cutting stainless | ⚠️ **Work-hardened. Sharp tool, positive feed** (§13 → `shop-metalwork-cutting-drilling-and-machining`, §14 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Machined part moved after cutting | ⚠️ **Residual stress. Rough, rest, finish** (§14 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Chatter on the lathe | ⚠️ **Rigidity, centre height, feed** (§18 → `shop-metalwork-cutting-drilling-and-machining`) |\n| Weld is porous | ⚠️ **Contamination or lost shielding gas** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Work distorted after welding | ⚠️ **Shrinkage. Tack, stagger, clamp** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Braze won't flow | ⚠️ **Not hot enough, wrong flux, or gap too wide** (§20 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Hardened part cracked | ⚠️ **Wrong quench, or never tempered** (§22 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n| Eyes gritty hours after welding | ⚠️ **Arc eye. Medical attention** (§19 → `shop-welding-forging-heat-treatment-and-shop-setup`) |\n\n### 31.2 Before you start the machine\n- [ ] ⚠️ **Eye protection on; hearing protection for anything loud** (§2 → `shop-materials-safety-reading-wood-and-stock`)\n- [ ] ⚠️ **No gloves, loose sleeves, jewellery; hair tied** (§2 → `shop-materials-safety-reading-wood-and-stock`)\n- [ ] Guards fitted; ⚠️ **riving knife in place** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`)\n- [ ] ⚠️ **Workpiece clamped or properly supported** (§8 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §17 → `shop-metalwork-cutting-drilling-and-machining`)\n- [ ] Blade\u002Fbit sharp and correct for the material (§7 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, §8 → `shop-woodworking-tools-sharpening-joinery-and-finishing`)\n- [ ] ⚠️ **Push stick within reach; hands' path planned** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`)\n- [ ] ⚠️ **Standing out of the line of fire** (§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`)\n- [ ] Extraction running; ⚠️ **respirator if fine dust or fume** (§26 → `shop-welding-forging-heat-treatment-and-shop-setup`)\n- [ ] Chuck key removed (§18 → `shop-metalwork-cutting-drilling-and-machining`)\n- [ ] ⚠️ **Not tired, not rushing, not distracted** (§2 → `shop-materials-safety-reading-wood-and-stock`)\n\n---\n\n## §32. Method\n\n**§1–§26 → `shop-materials-safety-reading-wood-and-stock`, `shop-woodworking-tools-sharpening-joinery-and-finishing`, `shop-metalwork-cutting-drilling-and-machining`, `shop-welding-forging-heat-treatment-and-shop-setup` rests on established craft practice and materials science** — **grain behaviour and\nwood movement, sharpening geometry, the welding process families, heat treatment\nmetallurgy, and standard machine safety practice.** ⚠️ **None of it needed verification;\ntempering colours and kickback mechanics have not changed.**\n\n**Two searches were run in August 2026**, on **US table saw regulation** and **welding fume\nexposure** — ⚠️ **both chosen because they are safety topics where the practical guidance\ndepends on facts that recently moved, and where hobbyists most commonly rely on outdated\nor vibes-based information.**\n\n**Confidence.** **High** in §2 → `shop-materials-safety-reading-wood-and-stock`, §7 → `shop-woodworking-tools-sharpening-joinery-and-finishing` and §9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`, which are the sections I'd most want read.\n⚠️ **\"Sharp is safe\" is the single most useful principle here and it is counterintuitive to\nbeginners.** ⚠️ **§9 → `shop-woodworking-tools-sharpening-joinery-and-finishing`'s kickback mechanism — specifically that using the fence and mitre\ngauge together traps the offcut, and that the riving knife rather than the guard is the\neffective control — prevents a specific, common, serious injury.** **And §2 → `shop-materials-safety-reading-wood-and-stock`'s point that\nhobbyists reach for PPE (the weakest control) while ignoring extraction is the pattern\nworth breaking.**\n\n**High** on §27.1's chronology, which comes from the Federal Register, CPSC documents and\ntrade reporting: ⚠️ **the 3.5 mm\u002F1 m\u002Fs performance criterion and its derivation from UL's\n4 mm laceration threshold, the measured AIM performance figures, and the withdrawal\nannounced 20 August 2025.** ⚠️ **I've deliberately given BOTH the patent-monopoly objection\nand the injury-prevention counter-argument, because this was never a clean safety-versus-\nindustry question — the Power Tool Institute source is an industry body and the Consumer\nReports source is an advocacy organization, and I've identified both inline rather than\npresenting either as neutral.**\n\n**High** on §27.2's regulatory numbers, which trace to OSHA's own standard and\ninterpretations: ⚠️ **the 5 µg\u002Fm³ PEL and 2.5 µg\u002Fm³ action level under 29 CFR 1910.1026,\nIARC Group 1 classification, and OSHA's determination that engineering controls must be\nthe primary means.** ⚠️ **The epidemiological figures (558,000 exposed workers, +85% lung\ncancer risk, doubled risk in stainless welders) come from industrial-hygiene vendors\nciting research rather than from papers I read directly, and I've marked them as\nreported.** ⚠️ **The \"ten minutes on stainless overexposes you\" quote is from a single\nspecialist in a vendor publication and I've explicitly flagged it as illustrative — the\norder of magnitude is the useful part, not the number.**\n",{"name":5,"description":7},"develop","ae32736a1aabddabca5d2c96d665aa0ebc7d8700","src\u002Fvibey_tools\u002Fskills\u002Fplugins\u002Fworking-with-wood-and-metal\u002Fskills\u002Fshop-reference",3,"https:\u002F\u002Fgithub.com\u002Fthe-vibey-project\u002Fvibey","https:\u002F\u002Fthe-vibey-project.github.io\u002Fvibey\u002F","https:\u002F\u002Fgithub.com\u002Fthe-vibey-project","https:\u002F\u002Fvibewithadam.matthewsteinberger.com","freedom for software engineers","2026-11-15 05:47:42",{"source":8,"skillName":5,"commands":35,"prompt":45,"zipAvailable":46},[36,39,42],{"tool":37,"command":38},"npx","npx skills add the-vibey-project\u002Fvibey --skill shop-reference",{"tool":40,"command":41},"bunx","bunx skills add the-vibey-project\u002Fvibey --skill shop-reference",{"tool":43,"command":44},"pnpm","pnpm dlx skills add the-vibey-project\u002Fvibey --skill shop-reference","安装技能，技能地址：https:\u002F\u002Fgithub.com\u002Fthe-vibey-project\u002Fvibey\u002Fblob\u002Fdevelop\u002Fsrc\u002Fvibey_tools\u002Fskills\u002Fplugins\u002Fworking-with-wood-and-metal\u002Fskills\u002Fshop-reference\u002FSKILL.md",true,[],[49,56,63,70,77,84],{"skillNo":50,"name":51,"nameZh":6,"description":52,"descriptionZh":6,"repositoryFullName":8,"ownerLogin":9,"ownerAvatarUrl":10,"ownerAccountNo":11,"ownerDisplayName":12,"repositoryNo":13,"starsCount":14,"licenseSpdxId":15,"licenseFileUrl":6,"sourceHtmlUrl":53,"categories":54,"keywords":55,"publishedAt":19},"01M7AT1FQJAE1FQYAMDTF490Y4","white-paper-writing","Use when writing white papers, technical reports, policy documents, thought leadership pieces, or any long-form authoritative document. Triggers on requests to write, structure, outline, or review white papers, technical reports, position papers, policy briefs, or evidence-driven arguments. Also use for B2B content marketing strategy, technical documentation requiring authority, academic-style reports, or any document that must educate while persuading. Use when someone asks \"how should I structure this\" for a long-form document.","https:\u002F\u002Fgithub.com\u002Fthe-vibey-project\u002Fvibey\u002Fblob\u002Fdevelop\u002Fsrc\u002Fvibey_tools\u002Fskills\u002Fplugins\u002Fwriting-craft\u002Fskills\u002Fwhite-paper-writing\u002FSKILL.md",[],[],{"skillNo":57,"name":58,"nameZh":6,"description":59,"descriptionZh":6,"repositoryFullName":8,"ownerLogin":9,"ownerAvatarUrl":10,"ownerAccountNo":11,"ownerDisplayName":12,"repositoryNo":13,"starsCount":14,"licenseSpdxId":15,"licenseFileUrl":6,"sourceHtmlUrl":60,"categories":61,"keywords":62,"publishedAt":19},"01M7AT16BJRJJKK2MASXRZS76G","prose-technical-mechanics","Use when editing or writing prose at a technical\u002Fmechanical level: choosing between Anglo-Saxon and Latinate diction, placing information in topic vs stress positions, writing periodic vs cumulative sentences, handling sentence rhythm, punctuation as logic, transitions, paragraph structure, or phonesthetics. Use when someone wants to understand WHY prose works or doesn't, not just surface-level style advice. Triggers on word choice, sentence structure, emphasis, rhythm, diction, or any deep writing mechanics question.","https:\u002F\u002Fgithub.com\u002Fthe-vibey-project\u002Fvibey\u002Fblob\u002Fdevelop\u002Fsrc\u002Fvibey_tools\u002Fskills\u002Fplugins\u002Fwriting-craft\u002Fskills\u002Fprose-technical-mechanics\u002FSKILL.md",[],[],{"skillNo":64,"name":65,"nameZh":6,"description":66,"descriptionZh":6,"repositoryFullName":8,"ownerLogin":9,"ownerAvatarUrl":10,"ownerAccountNo":11,"ownerDisplayName":12,"repositoryNo":13,"starsCount":14,"licenseSpdxId":15,"licenseFileUrl":6,"sourceHtmlUrl":67,"categories":68,"keywords":69,"publishedAt":19},"01M7AT0W9HT0ZZ9Y287NW99MR3","prose-mechanics","Use when writing, editing, or analyzing prose style; when trying to avoid generic AI-sounding writing; when applying specific prose styles such as journalistic, academic, narrative, KJV biblical, Hemingway plain, Latinate\u002FJamesian, Orwellian, Augustan, Victorian, Early Modern (Bacon, Browne, Milton), or free indirect discourse; or when coaching someone on writing voice and mechanics. Triggers on any request to improve, analyze, or write in a specific prose style, to fix \"AI-sounding\" writing, to make prose more vivid or concrete, to vary sentence rhythm, or to understand how a particular writer achieves their effects.","https:\u002F\u002Fgithub.com\u002Fthe-vibey-project\u002Fvibey\u002Fblob\u002Fdevelop\u002Fsrc\u002Fvibey_tools\u002Fskills\u002Fplugins\u002Fwriting-craft\u002Fskills\u002Fprose-mechanics\u002FSKILL.md",[],[],{"skillNo":71,"name":72,"nameZh":6,"description":73,"descriptionZh":6,"repositoryFullName":8,"ownerLogin":9,"ownerAvatarUrl":10,"ownerAccountNo":11,"ownerDisplayName":12,"repositoryNo":13,"starsCount":14,"licenseSpdxId":15,"licenseFileUrl":6,"sourceHtmlUrl":74,"categories":75,"keywords":76,"publishedAt":19},"01M7AT0KR635JX66X2X6F3E2CP","narrative-structure","Use when structuring stories, pitches, presentations, white papers, or any persuasive narrative; analyzing the hero's journey in fiction or non-fiction; applying StoryBrand for business communication; designing narrative arcs for thought leadership; or understanding Vogler, Snyder, Propp, or Campbell frameworks. Triggers on any narrative structure, storytelling, pitch structure, StoryBrand, hero's journey, three-act structure, Freytag, Save the Cat, narrative arc, or \"how should I structure this story\u002Fpitch\u002Fpresentation\" request.","https:\u002F\u002Fgithub.com\u002Fthe-vibey-project\u002Fvibey\u002Fblob\u002Fdevelop\u002Fsrc\u002Fvibey_tools\u002Fskills\u002Fplugins\u002Fwriting-craft\u002Fskills\u002Fnarrative-structure\u002FSKILL.md",[],[],{"skillNo":78,"name":79,"nameZh":6,"description":80,"descriptionZh":6,"repositoryFullName":8,"ownerLogin":9,"ownerAvatarUrl":10,"ownerAccountNo":11,"ownerDisplayName":12,"repositoryNo":13,"starsCount":14,"licenseSpdxId":15,"licenseFileUrl":6,"sourceHtmlUrl":81,"categories":82,"keywords":83,"publishedAt":19},"01M7AT0AKGW09NKKZDYBT8VRDE","legal-brief-writing","Use when writing legal briefs, motions, or any court filing; when analyzing judicial cognition and persuasion; when applying elite brief-writing techniques from Roberts, Clement, Kagan, Garner; or when structuring legal arguments for maximum persuasion. Also use for autistic\u002Fneurodivergent advocates who need to understand how their natural communication style maps to elite legal advocacy. Triggers on any legal writing, brief drafting, motion preparation, or legal argument structuring request.","https:\u002F\u002Fgithub.com\u002Fthe-vibey-project\u002Fvibey\u002Fblob\u002Fdevelop\u002Fsrc\u002Fvibey_tools\u002Fskills\u002Fplugins\u002Fwriting-craft\u002Fskills\u002Flegal-brief-writing\u002FSKILL.md",[],[],{"skillNo":85,"name":86,"nameZh":6,"description":87,"descriptionZh":6,"repositoryFullName":8,"ownerLogin":9,"ownerAvatarUrl":10,"ownerAccountNo":11,"ownerDisplayName":12,"repositoryNo":13,"starsCount":14,"licenseSpdxId":15,"licenseFileUrl":6,"sourceHtmlUrl":88,"categories":89,"keywords":90,"publishedAt":19},"01M7AT00VWPS4Q8B5VEMXX9NQT","journal-publishability-criteria","Use whenever a research paper, article or preprint is being written, revised, reviewed or published, and specifically before every publication of docs\u002Fpaper.md. Covers what legitimate journals actually gate on, in order of gating — the editor's desk screen (scope, novelty, package problems), what reviewers judge (methodological soundness, claims the evidence can carry, statistical and qualitative reporting), EQUATOR reporting guidelines, the ICMJE authorship criteria, COPE's view of text recycling, the near-universal generative-AI policy (no AI author, disclosure, author responsibility), TOP 2025 transparency standards, how to verify a journal is legitimate, submitting without an institution, and a pre-submission checklist. Triggers on requests to evaluate, review, prepare or submit a paper, to judge publishability, to write a declarations or data-availability section, to disclose AI use, or to check a journal.","https:\u002F\u002Fgithub.com\u002Fthe-vibey-project\u002Fvibey\u002Fblob\u002Fdevelop\u002Fsrc\u002Fvibey_tools\u002Fskills\u002Fplugins\u002Fwriting-craft\u002Fskills\u002Fjournal-publishability-criteria\u002FSKILL.md",[],[]]