AGENT SKILL

shop-reference

Use when correcting a woodworking or metalworking misconception, looking up a speed, feed, moisture content, drill or tap size, or fit tolerance, finding the resources, or needing a quick-reference picker — plus the current state of US table saw safety regulation and welding fume exposure control. Companion to the other wood and metal shop skills.

License 许可
MIT
最近更新
2026-11-15
Stars
★ 5
Forks
3

01 前言 Front Matter

name
shop-reference
description
Use when correcting a woodworking or metalworking misconception, looking up a speed, feed, moisture content, drill or tap size, or fit tolerance, finding the resources, or needing a quick-reference picker — plus the current state of US table saw safety regulation and welding fume exposure control. Companion to the other wood and metal shop skills.

03 SKILL.md 正文

Wood and Metal Shop Craft: What's Live, Misconceptions, Numbers, and Resources

Part 5 of 5 of the Working with Wood and Metal reference (plugin working-with-wood-and-metal), covering §27–§32. Sibling skills: shop-materials-safety-reading-wood-and-stock (§0–§4), shop-woodworking-tools-sharpening-joinery-and-finishing (§5–§12), shop-metalwork-cutting-drilling-and-machining (§13–§18), shop-welding-forging-heat-treatment-and-shop-setup (§19–§26). Section numbers are shared across the set; a reference written as §N → skill points into that sibling skill.

Currency: The craft is centuries old. Two areas moved. See §27 for US table saw safety regulation, and welding fume exposure control.

⚠️ Two materials that punish opposite mistakes. ⚠️ Wood MOVES forever and forgives imprecision; metal is dimensionally stable and forgives nothing. ⚠️ Wood is worked with the grain and cut fast; metal is worked against resistance and cut slowly. The habits that make you good at one will actively hurt you at the other.

Complements a manufacturing reference (industrial process and tolerancing), a materials/furniture reference (wood movement and finishing at the design level), and a thermodynamics reference (heat treatment physics).

⚠️ SAFETY IS §2 → shop-materials-safety-reading-wood-and-stock AND IT IS FIRST FOR A REASON. ⚠️ This document describes techniques; it does not substitute for supervised instruction on machinery. The table saw, angle grinder and welding arc each injure large numbers of people every year, and the mechanisms are specific and learnable.

⚠️ GOTCHA boxes mark the habits that cause injuries and the received wisdom that's wrong.

The three ideas that organize this document:

  1. ⚠️ SHARP IS SAFE (§7 → shop-woodworking-tools-sharpening-joinery-and-finishing). A dull tool requires force, force removes control, and loss of control is how people get hurt. Sharpening is not a side skill — it's the gateway to everything else.
  2. ⚠️ The material is not neutral (§3 → shop-materials-safety-reading-wood-and-stock, §14 → shop-metalwork-cutting-drilling-and-machining). Wood grain direction, and metal's heat and work-hardening behaviour, determine technique. Fighting the material is the definition of doing it wrong.
  3. ⚠️ The invisible hazards are the ones that get you (§2 → shop-materials-safety-reading-wood-and-stock, §26 → shop-welding-forging-heat-treatment-and-shop-setup, §27.2). Wood dust and welding fume are classified carcinogens with no warning symptoms — and they're the risks hobbyists systematically ignore in favour of the dramatic ones.

§27. What's Live — verified August 2026

27.1 ⚠️ US table saw regulation: a reversal

⚠️ Directly relevant to §9 → shop-woodworking-tools-sharpening-joinery-and-finishing, and the outcome went the opposite way to what the sector expected.

  • ⚠️ The background: SawStop petitioned the CPSC in 2003 for a performance standard on blade-contact injuries. ⚠️ A 2017 proposed rule, supplemented in 2023, would have required table saws to limit the depth of cut to 3.5 mm or less when a test probe contacts the spinning blade at a radial approach rate of 1 m/s. ⚠️ The 3.5 mm figure derives from UL's identification of 4 mm as the threshold between simple and severe finger lacerations, minus 0.5 mm for the epidermis — below it, cuts should not damage nerves or arteries requiring surgery.
  • ⚠️ CPSC testing showed the standard was achievable: ⚠️ SawStop saws produced depths of cut from 1.5 to 2.8 mm and Bosch REAXX from about 1.8 to 2.5 mm.
  • ⚠️ THE REVERSAL: on 20 August 2025 the CPSC announced it would WITHDRAW the rule, ⚠️ as part of dropping "several existing and pending rulemakings that no longer align with agency priorities, and which fail to advance safety" — with the table saw standard leading the list of six.

⚠️ GOTCHA — the patent dimension is why this was never a simple safety question, and it's worth understanding before taking a side. ⚠️ Critics argued the rule would effectively mandate a patented technology, creating a government-mandated monopoly; SawStop sued Bosch, and in 2017 the ITC prohibited Bosch from importing REAXX saws for infringing SawStop patents — removing the main alternative from the US market. ⚠️ SawStop also filed suit against Felder in 2024 over the alternative technology CPSC had cited. ⚠️ A bipartisan bill was introduced to bar any such rule until at least five years after the relevant patents expire, which one analysis calculated could mean 2043. ⚠️ Note the counter-argument is equally concrete: CPSC estimated the rule would have prevented or mitigated over 49,000 injuries annually, and its own 2019 analysis found NO reduction in table saw injuries from 2010 to 2018 despite the voluntary modular blade guard standard adopted in 2010.

⚠️ The practical upshot for anyone with a table saw: ⚠️ AIM technology remains available and voluntary rather than required, it is not being retrofitted or mandated, and — importantly — it addresses BLADE CONTACT, not KICKBACK. ⚠️ The riving knife, push stick and stance in §9 → shop-woodworking-tools-sharpening-joinery-and-finishing remain the controls that matter, and they cost nothing. ⚠️ Scale note: CPSC estimated roughly 33,400 emergency-department-treated table saw injuries in 2015, and around 54,800 medically treated blade-contact injuries annually in earlier analysis.

27.2 ⚠️ Welding fume: the numbers behind the ventilation advice

⚠️ §19 → shop-welding-forging-heat-treatment-and-shop-setup's PPE paragraph, quantified — and the figures explain why casual stainless welding in an unventilated garage is a genuinely bad idea.

  • ⚠️ Hexavalent chromium — Cr(VI) — forms when arc welding heats chromium-bearing metal, principally STAINLESS STEEL. ⚠️ IARC classifies all hexavalent chromium compounds as Group 1 carcinogens.
  • ⚠️ The OSHA permissible exposure limit is 5 µg/m³ as an 8-hour time-weighted average (29 CFR 1910.1026), with an ACTION LEVEL of 2.5 µg/m³ that triggers monitoring and medical surveillance. ⚠️ That PEL is a tenfold reduction from the previous limit and is reported as 1,000 times lower than the PEL for general welding fume. ⚠️ NIOSH's recommended exposure limit is reported at 0.2 µg/m³ — 25× more protective than OSHA's.
  • ⚠️ The exposure risk is not theoretical. ⚠️ An estimated 558,000 US workers are exposed to airborne Cr(VI); welders with high exposure are reported to face an 85% increased lung cancer risk, and stainless steel welders nearly double the general population's risk per meta-analysis.
  • ⚠️ How fast you reach it: ⚠️ one industry source quotes an air quality specialist saying that MIG or stick welding on stainless for more than about ten minutes will overexpose you — "the limit is that low." ⚠️ Treat that as illustrative rather than precise, but the order of magnitude is the point.

⚠️ GOTCHA — the control hierarchy applies here exactly as in §2 → shop-materials-safety-reading-wood-and-stock, and OSHA is explicit about the order. ⚠️ LOCAL EXHAUST VENTILATION at the source is the primary engineering control, supplemented by general dilution ventilation — and OSHA has determined engineering and work-practice controls must be the PRIMARY means, not respirators. ⚠️ General dilution ventilation "cannot replace LEV for high-hazard operations." ⚠️ Note also a documented trap: the safety data sheet for a chromium-containing alloy will list chromium in its neutral state, which is NOT a carcinogen — the Cr(VI) is CREATED by the arc. ⚠️ So an SDS that looks clean does not mean the operation is.

⚠️ The other fume hazards in the same breath: ⚠️ manganese (neurological effects, which is why ACGIH's value is set to mitigate brain damage), nickel, and iron oxide (⚠️ OSHA PEL 10 mg/m³ — the least toxic common case, which is why mild steel is the comparatively benign scenario). ⚠️ European practice sets a general respirable dust limit of 1.25 mg/m³ with 0.010 mg/m³ for Cr(VI) and 0.006 mg/m³ for nickel compounds (TRGS 900), and applies a MINIMIZATION principle for carcinogens — exposure reduced as far as technically possible even when the limit is formally met. ⚠️ For the hobbyist, the honest translation: ⚠️ weld mild steel with your head out of the plume and a fan drawing across; ⚠️ do not weld stainless or galvanized without real extraction and respiratory protection; and treat "it's only a short job" as exactly the reasoning that produces cumulative exposure.


§28. Misconceptions

Misconception Correction
A sharp tool is more dangerous ⚠️ Dull needs force; force loses control (§7 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Sharpening is an advanced skill ⚠️ It's the prerequisite for everything (§7 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Hardwood means hard ⚠️ Botanical, not mechanical. Balsa is a hardwood (§3 → shop-materials-safety-reading-wood-and-stock)
Kiln-dried wood is stable ⚠️ It moves with humidity forever (§3 → shop-materials-safety-reading-wood-and-stock)
Measure carefully and it'll fit ⚠️ TRANSFER instead of measuring where you can (§5 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Use the fence and mitre gauge together ⚠️ Traps the offcut. Classic kickback cause (§9 → shop-woodworking-tools-sharpening-joinery-and-finishing)
The blade guard is the main protection ⚠️ The RIVING KNIFE prevents kickback (§9 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Flesh-detection makes a saw safe ⚠️ It addresses contact, not kickback (§9 → shop-woodworking-tools-sharpening-joinery-and-finishing, §27.1)
Clamp harder to close the joint ⚠️ A joint needing force is cut wrong (§11 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Glue squeeze-out will sand off ⚠️ It blocks finish. Remove it wet (§11 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Gloves protect you around machines ⚠️ NEVER near rotating machinery (§2 → shop-materials-safety-reading-wood-and-stock, §18 → shop-metalwork-cutting-drilling-and-machining)
Push harder to cut metal faster ⚠️ Rubbing work-hardens; then nothing cuts (§14 → shop-metalwork-cutting-drilling-and-machining)
Cutting fluid is optional ⚠️ It's cooling. Heat destroys edges and tempers (§14 → shop-metalwork-cutting-drilling-and-machining)
More thread engagement is stronger ⚠️ ~75% is standard; more just snaps taps (§17 → shop-metalwork-cutting-drilling-and-machining)
Mild steel can be hardened ⚠️ Not enough carbon (§22 → shop-welding-forging-heat-treatment-and-shop-setup)
Hardened steel is ready to use ⚠️ Brittle until tempered. Never skip it (§22 → shop-welding-forging-heat-treatment-and-shop-setup)
A cutting disc can grind a little ⚠️ Side loading shatters it (§2 → shop-materials-safety-reading-wood-and-stock, §16 → shop-metalwork-cutting-drilling-and-machining)
Arc eye happens immediately ⚠️ Symptoms hours later. Bystanders too (§19 → shop-welding-forging-heat-treatment-and-shop-setup)
A dust mask handles welding fume ⚠️ It doesn't. Extraction first (§26 → shop-welding-forging-heat-treatment-and-shop-setup, §27.2)
The SDS shows no carcinogen, so it's fine ⚠️ The arc CREATES Cr(VI) (§27.2)
A shop vac controls wood dust ⚠️ It misses the dangerous fine fraction (§26 → shop-welding-forging-heat-treatment-and-shop-setup)
Wood dust is a nuisance ⚠️ Classified carcinogen; hardwood especially (§2 → shop-materials-safety-reading-wood-and-stock)
Welding fixes a bad fit ⚠️ Fit-up determines weld quality (§19 → shop-welding-forging-heat-treatment-and-shop-setup)
Weld it all at once for strength ⚠️ Distortion. Tack and stagger (§19 → shop-welding-forging-heat-treatment-and-shop-setup)

§29. Numbers

⚠️ Wood MC for heated interiors  ⚠️ ~6–8%
⚠️ Tangential movement  ⚠️ roughly 2× radial
⚠️ Sharpening angles  ⚠️ ~25° primary, ~30° secondary (bench chisels)
⚠️ Hacksaw  ⚠️ minimum 3 teeth in the cut
⚠️ Tap drill  ⚠️ ~75% thread engagement standard
⚠️ Brazing vs soldering  ⚠️ ~450°C dividing line
⚠️ Caliper realistic resolution  ~0.05 mm · micrometer ~0.01 mm
⚠️ Table saw AIM standard (proposed)  ⚠️ ≤3.5 mm depth of cut at 1 m/s
⚠️ Measured AIM performance  ⚠️ SawStop 1.5–2.8 mm · Bosch 1.8–2.5 mm
⚠️ CPSC rule withdrawn  ⚠️ 20 August 2025
⚠️ Table saw injuries  ⚠️ ~33,400 ED-treated (2015); ~49,000+ the rule
                       would have prevented or mitigated annually
⚠️ Cr(VI) OSHA PEL  ⚠️ 5 µg/m³ 8-h TWA · action level 2.5 µg/m³
⚠️ Cr(VI) NIOSH REL  ⚠️ 0.2 µg/m³ (25× stricter)
⚠️ Iron oxide fume PEL  10 mg/m³ — ⚠️ 1,000× higher than Cr(VI)
⚠️ US workers exposed to Cr(VI)  ⚠️ ~558,000
⚠️ Lung cancer risk  ⚠️ reported +85% in high-exposure welders

§30. Learning and Resources

Source Why
A local class or makerspace ⚠️ Machinery genuinely needs supervised first use
Hoadley, Understanding Wood ⚠️ §3 → shop-materials-safety-reading-wood-and-stock. The book on wood as a material
Sellers / Schwarz / Cosman (hand tools) ⚠️ §6–§7 → shop-woodworking-tools-sharpening-joinery-and-finishing, and free video is genuinely good here
Fine Woodworking archive Decades of tested technique
Machinery's Handbook ⚠️ §15–§25 → shop-metalwork-cutting-drilling-and-machining, shop-welding-forging-heat-treatment-and-shop-setup. The trade's single reference
Sparey, The Amateur's Lathe ⚠️ §18 → shop-metalwork-cutting-drilling-and-machining, classic and still excellent
Hall / Workshop Practice Series ⚠️ Small, cheap, focused volumes
AWS welding handbooks / Welding For Dummies §19 → shop-welding-forging-heat-treatment-and-shop-setup at both ends
Lorena Bull / blacksmithing guilds §21 → shop-welding-forging-heat-treatment-and-shop-setup
OSHA 1910.1026 and CPL 02-02-074 ⚠️ §27.2, primary
CPSC docket CPSC-2011-0074 ⚠️ §27.1, primary
Manufacturer manuals ⚠️ Actually read them; the guards exist for reasons

§31. Quick Reference

31.1 Picker

Problem Where
Plane tears out the grain ⚠️ Wrong direction, or use a scraper (§3 → shop-materials-safety-reading-wood-and-stock, §6 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Nothing fits despite careful measuring ⚠️ Four-square first; transfer, don't measure (§4 → shop-materials-safety-reading-wood-and-stock, §5 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Joint too tight to assemble ⚠️ It'll split when glued. Pare it (§10 → shop-woodworking-tools-sharpening-joinery-and-finishing, §11 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Finish has pale patches ⚠️ Glue residue (§11 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Saw burns the wood ⚠️ Dull blade, slow feed, or misaligned fence (§8 → shop-woodworking-tools-sharpening-joinery-and-finishing, §9 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Workpiece thrown back at me ⚠️ Kickback. Riving knife, stance, technique (§9 → shop-woodworking-tools-sharpening-joinery-and-finishing)
Drill wanders ⚠️ Centre punch (§17 → shop-metalwork-cutting-drilling-and-machining)
Tap snapped ⚠️ Too much engagement, no fluid, not square (§17 → shop-metalwork-cutting-drilling-and-machining)
Tool stops cutting stainless ⚠️ Work-hardened. Sharp tool, positive feed (§13 → shop-metalwork-cutting-drilling-and-machining, §14 → shop-metalwork-cutting-drilling-and-machining)
Machined part moved after cutting ⚠️ Residual stress. Rough, rest, finish (§14 → shop-metalwork-cutting-drilling-and-machining)
Chatter on the lathe ⚠️ Rigidity, centre height, feed (§18 → shop-metalwork-cutting-drilling-and-machining)
Weld is porous ⚠️ Contamination or lost shielding gas (§19 → shop-welding-forging-heat-treatment-and-shop-setup)
Work distorted after welding ⚠️ Shrinkage. Tack, stagger, clamp (§19 → shop-welding-forging-heat-treatment-and-shop-setup)
Braze won't flow ⚠️ Not hot enough, wrong flux, or gap too wide (§20 → shop-welding-forging-heat-treatment-and-shop-setup)
Hardened part cracked ⚠️ Wrong quench, or never tempered (§22 → shop-welding-forging-heat-treatment-and-shop-setup)
Eyes gritty hours after welding ⚠️ Arc eye. Medical attention (§19 → shop-welding-forging-heat-treatment-and-shop-setup)

31.2 Before you start the machine

  • [ ] ⚠️ Eye protection on; hearing protection for anything loud (§2 → shop-materials-safety-reading-wood-and-stock)
  • [ ] ⚠️ No gloves, loose sleeves, jewellery; hair tied (§2 → shop-materials-safety-reading-wood-and-stock)
  • [ ] Guards fitted; ⚠️ riving knife in place (§9 → shop-woodworking-tools-sharpening-joinery-and-finishing)
  • [ ] ⚠️ Workpiece clamped or properly supported (§8 → shop-woodworking-tools-sharpening-joinery-and-finishing, §17 → shop-metalwork-cutting-drilling-and-machining)
  • [ ] Blade/bit sharp and correct for the material (§7 → shop-woodworking-tools-sharpening-joinery-and-finishing, §8 → shop-woodworking-tools-sharpening-joinery-and-finishing)
  • [ ] ⚠️ Push stick within reach; hands' path planned (§9 → shop-woodworking-tools-sharpening-joinery-and-finishing)
  • [ ] ⚠️ Standing out of the line of fire (§9 → shop-woodworking-tools-sharpening-joinery-and-finishing)
  • [ ] Extraction running; ⚠️ respirator if fine dust or fume (§26 → shop-welding-forging-heat-treatment-and-shop-setup)
  • [ ] Chuck key removed (§18 → shop-metalwork-cutting-drilling-and-machining)
  • [ ] ⚠️ Not tired, not rushing, not distracted (§2 → shop-materials-safety-reading-wood-and-stock)

§32. Method

§1–§26 → shop-materials-safety-reading-wood-and-stock, shop-woodworking-tools-sharpening-joinery-and-finishing, shop-metalwork-cutting-drilling-and-machining, shop-welding-forging-heat-treatment-and-shop-setup rests on established craft practice and materials science — grain behaviour and wood movement, sharpening geometry, the welding process families, heat treatment metallurgy, and standard machine safety practice. ⚠️ None of it needed verification; tempering colours and kickback mechanics have not changed.

Two searches were run in August 2026, on US table saw regulation and welding fume exposure — ⚠️ both chosen because they are safety topics where the practical guidance depends on facts that recently moved, and where hobbyists most commonly rely on outdated or vibes-based information.

Confidence. High in §2 → shop-materials-safety-reading-wood-and-stock, §7 → shop-woodworking-tools-sharpening-joinery-and-finishing and §9 → shop-woodworking-tools-sharpening-joinery-and-finishing, which are the sections I'd most want read. ⚠️ "Sharp is safe" is the single most useful principle here and it is counterintuitive to beginners. ⚠️ §9 → shop-woodworking-tools-sharpening-joinery-and-finishing's kickback mechanism — specifically that using the fence and mitre gauge together traps the offcut, and that the riving knife rather than the guard is the effective control — prevents a specific, common, serious injury. And §2 → shop-materials-safety-reading-wood-and-stock's point that hobbyists reach for PPE (the weakest control) while ignoring extraction is the pattern worth breaking.

High on §27.1's chronology, which comes from the Federal Register, CPSC documents and trade reporting: ⚠️ the 3.5 mm/1 m/s performance criterion and its derivation from UL's 4 mm laceration threshold, the measured AIM performance figures, and the withdrawal announced 20 August 2025. ⚠️ I've deliberately given BOTH the patent-monopoly objection and the injury-prevention counter-argument, because this was never a clean safety-versus- industry question — the Power Tool Institute source is an industry body and the Consumer Reports source is an advocacy organization, and I've identified both inline rather than presenting either as neutral.

High on §27.2's regulatory numbers, which trace to OSHA's own standard and interpretations: ⚠️ the 5 µg/m³ PEL and 2.5 µg/m³ action level under 29 CFR 1910.1026, IARC Group 1 classification, and OSHA's determination that engineering controls must be the primary means. ⚠️ The epidemiological figures (558,000 exposed workers, +85% lung cancer risk, doubled risk in stainless welders) come from industrial-hygiene vendors citing research rather than from papers I read directly, and I've marked them as reported. ⚠️ The "ten minutes on stainless overexposes you" quote is from a single specialist in a vendor publication and I've explicitly flagged it as illustrative — the order of magnitude is the useful part, not the number.

04 同仓库更多 Skills

the-vibey-project
the-vibey-project/vibey

white-paper-writing

Use when writing white papers, technical reports, policy documents, thought leadership pieces, or any long-form authoritative document. Triggers on requests to write, structure, outline, or review white papers, technical reports, position papers, policy briefs, or evidence-driven arguments. Also use for B2B content marketing strategy, technical documentation requiring authority, academic-style reports, or any document that must educate while persuading. Use when someone asks "how should I structure this" for a long-form document.

★ 5
the-vibey-project
the-vibey-project/vibey

prose-technical-mechanics

Use when editing or writing prose at a technical/mechanical level: choosing between Anglo-Saxon and Latinate diction, placing information in topic vs stress positions, writing periodic vs cumulative sentences, handling sentence rhythm, punctuation as logic, transitions, paragraph structure, or phonesthetics. Use when someone wants to understand WHY prose works or doesn't, not just surface-level style advice. Triggers on word choice, sentence structure, emphasis, rhythm, diction, or any deep writing mechanics question.

★ 5
the-vibey-project
the-vibey-project/vibey

prose-mechanics

Use when writing, editing, or analyzing prose style; when trying to avoid generic AI-sounding writing; when applying specific prose styles such as journalistic, academic, narrative, KJV biblical, Hemingway plain, Latinate/Jamesian, Orwellian, Augustan, Victorian, Early Modern (Bacon, Browne, Milton), or free indirect discourse; or when coaching someone on writing voice and mechanics. Triggers on any request to improve, analyze, or write in a specific prose style, to fix "AI-sounding" writing, to make prose more vivid or concrete, to vary sentence rhythm, or to understand how a particular writer achieves their effects.

★ 5
the-vibey-project
the-vibey-project/vibey

narrative-structure

Use when structuring stories, pitches, presentations, white papers, or any persuasive narrative; analyzing the hero's journey in fiction or non-fiction; applying StoryBrand for business communication; designing narrative arcs for thought leadership; or understanding Vogler, Snyder, Propp, or Campbell frameworks. Triggers on any narrative structure, storytelling, pitch structure, StoryBrand, hero's journey, three-act structure, Freytag, Save the Cat, narrative arc, or "how should I structure this story/pitch/presentation" request.

★ 5
the-vibey-project
the-vibey-project/vibey

legal-brief-writing

Use when writing legal briefs, motions, or any court filing; when analyzing judicial cognition and persuasion; when applying elite brief-writing techniques from Roberts, Clement, Kagan, Garner; or when structuring legal arguments for maximum persuasion. Also use for autistic/neurodivergent advocates who need to understand how their natural communication style maps to elite legal advocacy. Triggers on any legal writing, brief drafting, motion preparation, or legal argument structuring request.

★ 5
the-vibey-project
the-vibey-project/vibey

journal-publishability-criteria

Use whenever a research paper, article or preprint is being written, revised, reviewed or published, and specifically before every publication of docs/paper.md. Covers what legitimate journals actually gate on, in order of gating — the editor's desk screen (scope, novelty, package problems), what reviewers judge (methodological soundness, claims the evidence can carry, statistical and qualitative reporting), EQUATOR reporting guidelines, the ICMJE authorship criteria, COPE's view of text recycling, the near-universal generative-AI policy (no AI author, disclosure, author responsibility), TOP 2025 transparency standards, how to verify a journal is legitimate, submitting without an institution, and a pre-submission checklist. Triggers on requests to evaluate, review, prepare or submit a paper, to judge publishability, to write a declarations or data-availability section, to disclose AI use, or to check a journal.

★ 5