thermo-cycles-exergy-combustion-and-psychrometrics
Use for applied cycle analysis: power cycles including Rankine, Brayton, Otto and Diesel with their efficiency limits and real irreversibilities, refrigeration and heat pump cycles and coefficient of performance, exergy and second-law efficiency and where work potential is actually destroyed, combustion with stoichiometry, adiabatic flame temperature and heating values, and psychrometrics including wet-bulb, dew point and the sensible-latent split.
- License 许可
- MIT
- 最近更新
- 2026-11-15
- Stars
- ★ 5
- Forks
- 3
01 前言 Front Matter
- name
- thermo-cycles-exergy-combustion-and-psychrometrics
- description
- Use for applied cycle analysis: power cycles including Rankine, Brayton, Otto and Diesel with their efficiency limits and real irreversibilities, refrigeration and heat pump cycles and coefficient of performance, exergy and second-law efficiency and where work potential is actually destroyed, combustion with stoichiometry, adiabatic flame temperature and heating values, and psychrometrics including wet-bulb, dew point and the sensible-latent split.
03 SKILL.md 正文
Thermodynamics and Fluid Mechanics: Power Cycles, Refrigeration and Heat Pumps, Exergy, Combustion, and Psychrometrics
Part 2 of 6 of the Thermodynamics and Fluid Mechanics reference (plugin
thermodynamics-fluid-mechanics), covering §8–§12. Sibling skills:thermo-laws-entropy-property-relations-and-phase-behaviour(§0–§7),thermo-fluid-statics-control-volume-bernoulli-and-navier-stokes(§13–§18),thermo-dimensional-analysis-flows-turbulence-and-turbomachinery(§19–§24),thermo-heat-transfer-conduction-convection-radiation-and-exchangers(§25–§28),thermo-reference(§29–§35). Section numbers are shared across the set; a reference written as §N →skillpoints into that sibling skill.Currency: The laws are permanent — Carnot 1824, Navier-Stokes 1845. Two areas of practice moved. See §29 →
thermo-referencefor CFD and turbulence modelling, and high-density thermal management.
⚠️ These are one subject, not two. Both are continuum theories built on the same conservation laws applied to a control volume; heat transfer is the third face of the same object. Complements a fundamental-physics reference (statistical mechanics underneath), an aerospace reference (external aerodynamics), and a power-engineering reference (cycles at plant scale).
⚠️ Unusual epistemic status for this series: this content is as close to permanent as engineering knowledge gets. ⚠️ The Second Law has survived every attempt to violate it; Navier-Stokes dates to the 1840s. What changes is COMPUTATIONAL PRACTICE and APPLICATION — which is what §29 →
thermo-referencecovers.⚠️ GOTCHA boxes mark the classic misconceptions, and the places where a correct formula applied outside its assumptions gives confidently wrong answers.
The three ideas that organize this document:
- ⚠️ Define the control volume first. Most thermo and fluids errors are bookkeeping errors — the wrong boundary, or a term crossing it unaccounted (§2 →
thermo-laws-entropy-property-relations-and-phase-behaviour, §16 →thermo-fluid-statics-control-volume-bernoulli-and-navier-stokes).- ⚠️ The Second Law is about DIRECTION and about QUALITY of energy (§4 →
thermo-laws-entropy-property-relations-and-phase-behaviour). The First Law says you can't win; the Second says you can't break even — and the Second is where all the engineering lives.- ⚠️ Dimensionless groups are the most powerful tool in the subject (§19 →
thermo-dimensional-analysis-flows-turbulence-and-turbomachinery). They tell you which physics dominates before you compute anything, and they let a model predict a full-scale ship.
§8. Power Cycles
⚠️ CARNOT two isothermal + two isentropic. ⚠️ The efficiency ceiling,
and impractical — the isothermal heat exchange requires infinite time
⚠️ RANKINE steam. Pump → boiler → turbine → condenser.
⚠️ Improvements: superheat, reheat, regeneration (feedwater heating),
supercritical operation. ⚠️ Condensing at low pressure is what
makes it efficient — the vacuum matters as much as the boiler
⚠️ BRAYTON gas turbine. Compress → burn → expand.
⚠️ Improvements: intercooling, reheat, regeneration.
⚠️ COMBINED CYCLE — Brayton exhaust feeds a Rankine bottoming cycle,
reaching the highest efficiencies of any heat engine in service
OTTO spark ignition. η = 1 − 1/r^(γ−1) — ⚠️ efficiency depends on
COMPRESSION RATIO alone in the ideal case, and knock limits r
DIESEL compression ignition; higher r, cutoff ratio penalty
STIRLING ⚠️ external heat, regenerator, theoretically Carnot-efficient;
practically limited by heat transfer and sealing
⚠️ The universal cycle lesson: ⚠️ every improvement listed above is a way of moving
heat addition to a HIGHER average temperature or heat rejection to a LOWER one —
because §4 → thermo-laws-entropy-property-relations-and-phase-behaviour says that's the only lever. Regeneration, reheat and combined cycles are
all that one idea in different clothes.
⚠️ Isentropic efficiency — real turbines and compressors deviate from isentropic, and
⚠️ compressor irreversibility hurts more than turbine irreversibility in gas turbines
because the compressor consumes a large fraction of turbine output (the back-work ratio).
§9. Refrigeration and Heat Pumps
⚠️ A heat engine run backwards: work in, heat moved from cold to hot.
⚠️ COP_refrigeration = Q_C/W ⚠️ COP_heat pump = Q_H/W = COP_R + 1
⚠️ Carnot limits: COP_R = T_C/(T_H−T_C) COP_HP = T_H/(T_H−T_C)
⚠️ COP exceeds 1 routinely, and this confuses people — ⚠️ it is not an efficiency and does not violate anything. You're MOVING heat, not creating it, so getting 3–4 units of heat delivered per unit of work is ordinary. ⚠️ This is the entire thermodynamic case for heat pumps over resistance heating. ⚠️ The vapour-compression cycle: evaporator → compressor → condenser → expansion valve. ⚠️ The expansion valve is deliberately irreversible (throttling, isenthalpic) — a turbine would recover work but isn't worth the cost and complexity at small scale. ⚠️ COP collapses as the temperature lift grows — which is why air-source heat pumps degrade in extreme cold and why ground-source performs better. ⚠️ Absorption refrigeration — driven by heat rather than work; useful where waste heat is free.
§10. ⚠️ Exergy
⚠️ The concept that makes the Second Law quantitative and actionable, and it is under-taught. ⚠️ Exergy (availability) is the maximum useful work obtainable as a system comes to equilibrium with a specified DEAD STATE (the ambient environment).
⚠️ Energy is CONSERVED. Exergy is DESTROYED — in proportion to entropy
generated: ⚠️ X_destroyed = T₀ · S_gen (Gouy-Stodola)
⚠️ Why it matters practically: ⚠️ a First Law analysis says a furnace burning fuel at 2000 K to heat a room to 293 K is ~90% "efficient." A Second Law analysis says you have destroyed most of the fuel's capacity to do work. ⚠️ Exergy analysis locates WHERE in a plant the real losses occur — and it's usually the combustion chamber and the heat exchangers with large temperature differences, not the components engineers instinctively target. ⚠️ This is the rigorous version of "don't use a high-temperature source for a low-temperature job."
§11. Combustion
Stoichiometry, air-fuel ratio, equivalence ratio φ (⚠️ φ > 1 rich, φ < 1 lean), excess air. ⚠️ Heating values: ⚠️ HHV includes the latent heat of the water vapour formed; LHV does not. Quoted efficiencies differ by which is used, and cross-comparisons are frequently apples-to-oranges — ⚠️ condensing boilers achieving ">100% efficiency" are quoted on LHV and are recovering that latent heat. Adiabatic flame temperature; dissociation at high temperature; ⚠️ equilibrium vs kinetics — NOx formation is kinetically limited and strongly temperature-dependent, which is why lowering peak flame temperature is the primary NOx control. ⚠️ Flame types: premixed vs diffusion; laminar flame speed; ⚠️ flashback and blowoff as the stability limits.
§12. Psychrometrics
⚠️ The thermodynamics of moist air — HVAC's core tool and worth knowing because the intuitions are counterintuitive.
⚠️ Absolute vs RELATIVE humidity (⚠️ RH is relative to saturation AT THAT
TEMPERATURE — which is why heating air lowers RH with no moisture change)
DEW POINT ⚠️ the actual measure of moisture content, temperature-independent
WET BULB evaporative cooling limit
⚠️ ENTHALPY of moist air; the psychrometric chart
⚠️ Why evaporative cooling fails in humid climates: ⚠️ the wet-bulb temperature is the floor, and it approaches dry-bulb as RH approaches 100%. This is the same physics that limits human thermoregulation (see an exercise physiology reference §7) — and wet-bulb temperature is the meaningful heat-stress metric for exactly this reason. ⚠️ Sensible vs latent load: ⚠️ dehumidification often dominates cooling energy in humid climates, and a system sized only on sensible load will fail to control humidity.
PART II — FLUID MECHANICS
04 同仓库更多 Skills
white-paper-writing
Use when writing white papers, technical reports, policy documents, thought leadership pieces, or any long-form authoritative document. Triggers on requests to write, structure, outline, or review white papers, technical reports, position papers, policy briefs, or evidence-driven arguments. Also use for B2B content marketing strategy, technical documentation requiring authority, academic-style reports, or any document that must educate while persuading. Use when someone asks "how should I structure this" for a long-form document.
prose-technical-mechanics
Use when editing or writing prose at a technical/mechanical level: choosing between Anglo-Saxon and Latinate diction, placing information in topic vs stress positions, writing periodic vs cumulative sentences, handling sentence rhythm, punctuation as logic, transitions, paragraph structure, or phonesthetics. Use when someone wants to understand WHY prose works or doesn't, not just surface-level style advice. Triggers on word choice, sentence structure, emphasis, rhythm, diction, or any deep writing mechanics question.
prose-mechanics
Use when writing, editing, or analyzing prose style; when trying to avoid generic AI-sounding writing; when applying specific prose styles such as journalistic, academic, narrative, KJV biblical, Hemingway plain, Latinate/Jamesian, Orwellian, Augustan, Victorian, Early Modern (Bacon, Browne, Milton), or free indirect discourse; or when coaching someone on writing voice and mechanics. Triggers on any request to improve, analyze, or write in a specific prose style, to fix "AI-sounding" writing, to make prose more vivid or concrete, to vary sentence rhythm, or to understand how a particular writer achieves their effects.
narrative-structure
Use when structuring stories, pitches, presentations, white papers, or any persuasive narrative; analyzing the hero's journey in fiction or non-fiction; applying StoryBrand for business communication; designing narrative arcs for thought leadership; or understanding Vogler, Snyder, Propp, or Campbell frameworks. Triggers on any narrative structure, storytelling, pitch structure, StoryBrand, hero's journey, three-act structure, Freytag, Save the Cat, narrative arc, or "how should I structure this story/pitch/presentation" request.
legal-brief-writing
Use when writing legal briefs, motions, or any court filing; when analyzing judicial cognition and persuasion; when applying elite brief-writing techniques from Roberts, Clement, Kagan, Garner; or when structuring legal arguments for maximum persuasion. Also use for autistic/neurodivergent advocates who need to understand how their natural communication style maps to elite legal advocacy. Triggers on any legal writing, brief drafting, motion preparation, or legal argument structuring request.
journal-publishability-criteria
Use whenever a research paper, article or preprint is being written, revised, reviewed or published, and specifically before every publication of docs/paper.md. Covers what legitimate journals actually gate on, in order of gating — the editor's desk screen (scope, novelty, package problems), what reviewers judge (methodological soundness, claims the evidence can carry, statistical and qualitative reporting), EQUATOR reporting guidelines, the ICMJE authorship criteria, COPE's view of text recycling, the near-universal generative-AI policy (no AI author, disclosure, author responsibility), TOP 2025 transparency standards, how to verify a journal is legitimate, submitting without an institution, and a pre-submission checklist. Triggers on requests to evaluate, review, prepare or submit a paper, to judge publishability, to write a declarations or data-availability section, to disclose AI use, or to check a journal.