mfg-mechanics-stress-fatigue-and-materials
Use for the mechanics underneath a physical design: what mechanical engineers actually do, stress, strain and deflection, failure theories and safety factors, fatigue and why most real failures are fatigue failures rather than overload, and materials selection with the property trade-offs that drive it. Includes the router for the whole manufacturing and mechanical engineering reference.
- License 许可
- MIT
- 最近更新
- 2026-11-15
- Stars
- ★ 5
- Forks
- 3
01 前言 Front Matter
- name
- mfg-mechanics-stress-fatigue-and-materials
- description
- Use for the mechanics underneath a physical design: what mechanical engineers actually do, stress, strain and deflection, failure theories and safety factors, fatigue and why most real failures are fatigue failures rather than overload, and materials selection with the property trade-offs that drive it. Includes the router for the whole manufacturing and mechanical engineering reference.
03 SKILL.md 正文
Manufacturing and Mechanical Engineering: What Mechanical Engineers Actually Do, Stress, Strain and Deflection, Failure Theories and Safety Factors, Fatigue, and Materials Selection
Part 1 of 5 of the Manufacturing and Mechanical Engineering for Software Devs reference (plugin
manufacturing-mechanical-engineering-for-software-devs), covering §0–§5. Sibling skills:mfg-machine-elements-mechanisms-and-tolerances(§6–§8),mfg-process-families-machining-additive-and-moulding(§9–§16),mfg-dfm-metrology-plm-npi-and-what-transfers(§17–§24),mfg-reference(§25–§30). Section numbers are shared across the set; a reference written as §N →skillpoints into that sibling skill.Currency: The mechanics is settled. Two areas moved. See §25 →
mfg-referencefor additive manufacturing after its correction, and industrial robotics adoption.
⚠️ Companion to a civil/industrial engineering reference. ⚠️ That one covers flow, constraints and safety systems; this one is about physically MAKING things — and the lessons are different.
⚠️ The governing asymmetry: in software the marginal cost of a change is near zero and in manufacturing it is enormous. ⚠️ Almost every practice in this document is a response to that one fact — tolerances, DFM, PLM, EVT/DVT/PVT gates, and the reason mechanical engineers appear conservative to software people.
⚠️ GOTCHA boxes mark the intuitions that don't survive contact with atoms.
The three ideas that organize this document:
- ⚠️ NOTHING IS EXACT — everything is a tolerance (§8 →
mfg-machine-elements-mechanisms-and-tolerances). The single biggest mental shift for software people: there is no equality in the physical world, only distributions, and a design that requires exactness is a design that fails.- ⚠️ The PROCESS determines the design, not the other way round (§9 →
mfg-process-families-machining-additive-and-moulding, §17 →mfg-dfm-metrology-plm-npi-and-what-transfers). Geometry that's free in CAD can be impossible, or absurdly expensive, to make.- ⚠️ FATIGUE kills things that were never overloaded (§4). Most mechanical failures happen far below the static strength, after many cycles — the physical analogue of a bug that only appears after a million requests.
§0. Routing
| You want... | Go to |
|---|---|
| ⚠️ What mech eng actually is | §1 |
| Stress and strain | §2 |
| Failure theories | §3 |
| ⚠️ Fatigue | §4 |
| Materials selection | §5 |
| Machine elements | §6 → mfg-machine-elements-mechanisms-and-tolerances |
| Mechanisms | §7 → mfg-machine-elements-mechanisms-and-tolerances |
| ⚠️ Tolerances and GD&T | §8 → mfg-machine-elements-mechanisms-and-tolerances |
| Process families | §9 → mfg-process-families-machining-additive-and-moulding |
| Casting and forming | §10 → mfg-process-families-machining-additive-and-moulding |
| Machining | §11 → mfg-process-families-machining-additive-and-moulding |
| Joining | §12 → mfg-process-families-machining-additive-and-moulding |
| Additive | §13 → mfg-process-families-machining-additive-and-moulding |
| Injection moulding | §14 → mfg-process-families-machining-additive-and-moulding |
| Sheet metal | §15 → mfg-process-families-machining-additive-and-moulding |
| Surface treatment | §16 → mfg-process-families-machining-additive-and-moulding |
| ⚠️ Design for manufacture | §17 → mfg-dfm-metrology-plm-npi-and-what-transfers |
| Metrology and QC | §18 → mfg-dfm-metrology-plm-npi-and-what-transfers |
| Scale economics | §19 → mfg-dfm-metrology-plm-npi-and-what-transfers |
| CAD and simulation | §20 → mfg-dfm-metrology-plm-npi-and-what-transfers |
| ⚠️ PLM — version control for atoms | §21 → mfg-dfm-metrology-plm-npi-and-what-transfers |
| Physical supply chain | §22 → mfg-dfm-metrology-plm-npi-and-what-transfers |
| NPI: EVT/DVT/PVT | §23 → mfg-dfm-metrology-plm-npi-and-what-transfers |
| ⚠️ What transfers | §24 → mfg-dfm-metrology-plm-npi-and-what-transfers |
| What's live | §25 → mfg-reference |
| Misconceptions, numbers | §26–§27 → mfg-reference |
| Books, quick ref, method | §28–§30 → mfg-reference |
§1. ⚠️ What Mechanical Engineers Actually Do
⚠️ Less calculation than software people imagine, and far more SPECIFYING, SOURCING and TOLERANCING.
⚠️ THE ACTUAL WORK requirements → concept → detail design →
⚠️ TOLERANCE ANALYSIS → material and process selection →
⚠️ DFM review → prototype → test → qualify → release →
⚠️ manage changes forever (§21)
⚠️ THE HARD PARTS ⚠️ tolerance stack-up (§8) · fatigue (§4) ·
thermal expansion · vibration · manufacturability (§17) ·
⚠️ and the supply chain (§22)
⚠️ THE ANALOGUE OF "IT COMPILES" ⚠️ a CAD model that looks right
proves almost nothing. It must be MAKEABLE, ASSEMBLABLE,
TOLERANT of variation, and survivable
⚠️ The mindset difference worth naming immediately: ⚠️ a software engineer optimizes for changeability because change is cheap. ⚠️ A mechanical engineer optimizes for GETTING IT RIGHT BEFORE COMMITTING, because tooling costs six figures and takes months, and a field recall costs more than the programme.
PART I — MECHANICAL DESIGN
§2. Stress, Strain and Deflection
⚠️ STRESS σ = F/A (Pa) — ⚠️ INTENSITY of load, not load
⚠️ STRAIN ε = ΔL/L — dimensionless deformation
⚠️ YOUNG'S MODULUS E = σ/ε — ⚠️ STIFFNESS, and it is NOT strength.
⚠️ Steel and stainless have nearly the same E; their strengths
differ enormously. Confusing the two is the classic beginner error
⚠️ POISSON'S RATIO — lateral contraction under axial load
⚠️ YIELD strength (permanent deformation begins) vs ULTIMATE (fracture)
⚠️ MODES tension · compression · shear · bending · torsion ·
⚠️ BUCKLING (a STABILITY failure — a slender column fails long
before it crushes, and the load depends on LENGTH SQUARED)
⚠️ Stress concentration is the practical one: ⚠️ holes, notches, sharp internal corners and abrupt section changes multiply local stress by a factor Kt, often 2–3×. ⚠️ This is why fillets exist, and why a sharp internal corner is a crack waiting to start (§4). ⚠️ "Add a radius" is one of the most common review comments in mechanical design. ⚠️ Deflection often governs before strength — ⚠️ a beam that is strong enough may still bend too much to work, and stiffness scales differently from strength (for a beam, with the CUBE of depth), which is why I-beams and ribs exist.
§3. Failure Theories and Safety Factors
⚠️ For ductile materials, von Mises (distortion energy) is the standard criterion; for brittle materials, maximum normal stress. ⚠️ The distinction matters because brittle materials fail in TENSION at surface flaws with no warning. ⚠️ Ductile vs brittle is the same lesson as elsewhere: ⚠️ ductile yields visibly first; brittle fails suddenly and completely. ⚠️ Design for ductile behaviour wherever consequences matter. ⚠️ Safety factors cover quantified uncertainty (see a civil engineering reference) — ⚠️ material variability, load uncertainty, model error, and degradation. ⚠️ They are not a substitute for understanding the failure mode. ⚠️ Temperature changes everything: ⚠️ many steels undergo a ductile-to-brittle transition on cooling — the mechanism behind several famous structural failures — and polymers change behaviour dramatically around their glass transition.
§4. ⚠️ Fatigue
⚠️ The single most important failure mode, and the one software intuition has no analogue for. ⚠️ Components fail after many cycles at stresses FAR BELOW the static strength — sometimes below the yield point entirely.
⚠️ S-N CURVE stress amplitude vs cycles to failure
⚠️ Some steels show an ENDURANCE LIMIT — below it, effectively
infinite life. ⚠️ ALUMINIUM DOES NOT. Aluminium accumulates
damage at any stress amplitude, which is why aircraft have
finite lives measured in cycles
⚠️ CRACK INITIATION then PROPAGATION then fast fracture
⚠️ MOST OF THE LIFE IS INITIATION, which is why SURFACE matters
enormously — ⚠️ finish, scratches, tool marks, corrosion pits
and stress concentrations (§2) all start cracks
⚠️ MEAN STRESS matters (Goodman/Gerber); ⚠️ COMPRESSIVE residual
stress HELPS, which is why shot peening works
⚠️ Related time-dependent failures: ⚠️ CREEP (slow deformation under sustained load at high temperature — the limit on turbine blades), stress corrosion cracking, hydrogen embrittlement, and fretting. ⚠️ The software translation, and it's genuinely useful: ⚠️ fatigue is the physical analogue of a defect that only manifests after prolonged operation — memory fragmentation, connection pool exhaustion, log disk filling, certificate expiry. ⚠️ Both are invisible in a short test, and both require thinking in CYCLES or TIME rather than in single events.
§5. Materials Selection
⚠️ STEELS cheap, stiff, strong, ⚠️ recyclable; rusts unless protected.
⚠️ Alloy and heat treatment change properties enormously — "steel"
is a family, not a material
⚠️ STAINLESS corrosion-resistant, ⚠️ same stiffness as steel, more
expensive, ⚠️ poorer thermal conductivity, some grades magnetic
⚠️ ALUMINIUM ⚠️ ~1/3 the density AND ~1/3 the stiffness of steel;
excellent strength-to-weight, ⚠️ NO endurance limit (§4)
TITANIUM excellent specific strength, biocompatible, ⚠️ expensive
and difficult to machine
⚠️ POLYMERS thermoplastics (remeltable, ⚠️ mouldable) vs thermosets
(cured, not remeltable). ⚠️ CREEP at room temperature, and
properties change with temperature and UV
COMPOSITES ⚠️ anisotropic — strength depends on fibre direction.
Superb specific properties, ⚠️ hard to inspect and to repair
CERAMICS hard, stiff, heat-resistant, ⚠️ BRITTLE
⚠️ The selection process (Ashby's method): ⚠️ define the function, the objective and the constraints, derive a material index, and use property charts. ⚠️ The key insight is that the right property is usually a RATIO — specific strength, specific stiffness, or strength per unit cost — not an absolute value. ⚠️ Galvanic corrosion is the one that bites in assembly: ⚠️ dissimilar metals in electrical contact with an electrolyte corrode preferentially, and the less noble one goes. Aluminium against stainless is a classic mistake.
04 同仓库更多 Skills
white-paper-writing
Use when writing white papers, technical reports, policy documents, thought leadership pieces, or any long-form authoritative document. Triggers on requests to write, structure, outline, or review white papers, technical reports, position papers, policy briefs, or evidence-driven arguments. Also use for B2B content marketing strategy, technical documentation requiring authority, academic-style reports, or any document that must educate while persuading. Use when someone asks "how should I structure this" for a long-form document.
prose-technical-mechanics
Use when editing or writing prose at a technical/mechanical level: choosing between Anglo-Saxon and Latinate diction, placing information in topic vs stress positions, writing periodic vs cumulative sentences, handling sentence rhythm, punctuation as logic, transitions, paragraph structure, or phonesthetics. Use when someone wants to understand WHY prose works or doesn't, not just surface-level style advice. Triggers on word choice, sentence structure, emphasis, rhythm, diction, or any deep writing mechanics question.
prose-mechanics
Use when writing, editing, or analyzing prose style; when trying to avoid generic AI-sounding writing; when applying specific prose styles such as journalistic, academic, narrative, KJV biblical, Hemingway plain, Latinate/Jamesian, Orwellian, Augustan, Victorian, Early Modern (Bacon, Browne, Milton), or free indirect discourse; or when coaching someone on writing voice and mechanics. Triggers on any request to improve, analyze, or write in a specific prose style, to fix "AI-sounding" writing, to make prose more vivid or concrete, to vary sentence rhythm, or to understand how a particular writer achieves their effects.
narrative-structure
Use when structuring stories, pitches, presentations, white papers, or any persuasive narrative; analyzing the hero's journey in fiction or non-fiction; applying StoryBrand for business communication; designing narrative arcs for thought leadership; or understanding Vogler, Snyder, Propp, or Campbell frameworks. Triggers on any narrative structure, storytelling, pitch structure, StoryBrand, hero's journey, three-act structure, Freytag, Save the Cat, narrative arc, or "how should I structure this story/pitch/presentation" request.
legal-brief-writing
Use when writing legal briefs, motions, or any court filing; when analyzing judicial cognition and persuasion; when applying elite brief-writing techniques from Roberts, Clement, Kagan, Garner; or when structuring legal arguments for maximum persuasion. Also use for autistic/neurodivergent advocates who need to understand how their natural communication style maps to elite legal advocacy. Triggers on any legal writing, brief drafting, motion preparation, or legal argument structuring request.
journal-publishability-criteria
Use whenever a research paper, article or preprint is being written, revised, reviewed or published, and specifically before every publication of docs/paper.md. Covers what legitimate journals actually gate on, in order of gating — the editor's desk screen (scope, novelty, package problems), what reviewers judge (methodological soundness, claims the evidence can carry, statistical and qualitative reporting), EQUATOR reporting guidelines, the ICMJE authorship criteria, COPE's view of text recycling, the near-universal generative-AI policy (no AI author, disclosure, author responsibility), TOP 2025 transparency standards, how to verify a journal is legitimate, submitting without an institution, and a pre-submission checklist. Triggers on requests to evaluate, review, prepare or submit a paper, to judge publishability, to write a declarations or data-availability section, to disclose AI use, or to check a journal.