AGENT SKILL

implementing-network-access-control-with-cisco-ise

Deploys Cisco Identity Services Engine (ISE) as a RADIUS policy server for 802.1X wired and wireless authentication, MAC Authentication Bypass, posture assessment, dynamic VLAN assignment, downloadable ACLs, and TrustSec Security Group Tags. Use when deploying enterprise NAC with ISE and Active Directory integration, enforcing endpoint posture compliance, or segmenting access with TrustSec instead of a generic 802.1X/PacketFence setup.

License 许可
Apache-2.0
最近更新
2026-09-11
Stars
★ 0
Forks
0

01 前言 Front Matter

name
implementing-network-access-control-with-cisco-ise
tags
[ "cisco-ise", "802.1x", "nac", "radius", "network-access-control", "posture-assessment", "mab", "dynamic-vlan", "eap-tls" ]
author
mahipal
domain
cybersecurity
license
Apache-2.0
version
1.0
nist_csf
[ "PR.IR-01", "DE.CM-01", "ID.AM-03", "PR.DS-02" ]
subdomain
network-security
description
Deploys Cisco Identity Services Engine (ISE) as a RADIUS policy server for 802.1X wired and wireless authentication, MAC Authentication Bypass, posture assessment, dynamic VLAN assignment, downloadable ACLs, and TrustSec Security Group Tags. Use when deploying enterprise NAC with ISE and Active Directory integration, enforcing endpoint posture compliance, or segmenting access with TrustSec instead of a generic 802.1X/PacketFence setup.
mitre_attack
[ "T1046", "T1040", "T1557", "T1071", "T1027" ]

02 资源文件 3

03 SKILL.md 正文

Implementing Network Access Control with Cisco ISE

Overview

Cisco Identity Services Engine (ISE) provides centralized network access control through 802.1X authentication, MAC Authentication Bypass (MAB), posture assessment, and guest access management. ISE acts as a RADIUS policy server that evaluates authentication requests from network devices (switches, wireless controllers) and returns authorization policies including VLAN assignments, downloadable ACLs (dACLs), and Security Group Tags (SGTs). This skill covers deploying ISE for enterprise wired 802.1X authentication with Active Directory integration, MAB fallback, posture compliance enforcement, and TrustSec segmentation.

When to Use

  • When deploying or configuring implementing network access control with cisco ise capabilities in your environment
  • When establishing security controls aligned to compliance requirements
  • When building or improving security architecture for this domain
  • When conducting security assessments that require this implementation

Prerequisites

  • Cisco ISE 3.1+ appliance or virtual machine (16 CPU cores, 64GB RAM minimum for production)
  • Cisco switches with 802.1X support (Catalyst 9000 series recommended)
  • Active Directory domain with user and computer accounts
  • PKI infrastructure for EAP-TLS certificate-based authentication
  • DNS and NTP configured consistently across ISE nodes and network devices
  • Supplicant software on endpoints (Windows native, AnyConnect NAM, or SecureW2)

Core Concepts

802.1X Architecture

The 802.1X framework involves three components:

Component Role Example
Supplicant Client requesting network access Windows 802.1X client, AnyConnect NAM
Authenticator Network device controlling port access Cisco Catalyst switch
Authentication Server Policy decision engine Cisco ISE (RADIUS)

Authentication Flow

1. Endpoint connects to switch port
2. Switch sends EAP-Request/Identity to endpoint
3. Endpoint responds with EAP-Response/Identity
4. Switch forwards credentials to ISE via RADIUS Access-Request
5. ISE authenticates against AD/LDAP/internal store
6. ISE evaluates authorization policy
7. ISE returns RADIUS Access-Accept with attributes (VLAN, dACL, SGT)
8. Switch enforces authorization on the port

Authentication Methods

Method Use Case Security Level
EAP-TLS Certificate-based, highest security High
PEAP-MSCHAPv2 Username/password via AD Medium
EAP-FAST Cisco proprietary, fast reauthentication Medium
MAB Non-802.1X devices (printers, IP phones) Low

Workflow

Step 1: Configure ISE for Active Directory Integration

Navigate to Administration > Identity Management > External Identity Sources > Active Directory:

  1. Add AD join point with domain name (e.g., corp.example.com)
  2. Provide domain admin credentials for ISE machine account
  3. Join ISE to the domain
  4. Select AD groups for authorization policies:
    • Domain Users - Standard employee access
    • Domain Computers - Machine authentication
    • IT-Admins - Privileged access
    • BYOD-Users - Personal device access

Step 2: Configure Network Devices in ISE

Navigate to Administration > Network Resources > Network Devices:

Name: SW-ACCESS-01
IP Address: 10.0.1.1/32
RADIUS Shared Secret: C0mpl3x$3cretKey!
SNMP Settings: v2c, community string
Device Type: Cisco Switches
Location: Building-A-Floor-1

Create a Network Device Group hierarchy:

Device Type:
  ├── Cisco Switches
  │   ├── Access Layer
  │   └── Distribution Layer
  └── Wireless Controllers
Location:
  ├── Building-A
  └── Building-B

Step 3: Configure Switch for 802.1X

Apply this configuration to the access switch:

! Enable AAA
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa accounting update newinfo periodic 2880

! Configure RADIUS server
radius server ISE-PRIMARY
 address ipv4 10.0.5.10 auth-port 1812 acct-port 1813
 key 0 C0mpl3x$3cretKey!
 automate-tester username radius-test probe-on

radius server ISE-SECONDARY
 address ipv4 10.0.5.11 auth-port 1812 acct-port 1813
 key 0 C0mpl3x$3cretKey!
 automate-tester username radius-test probe-on

aaa group server radius ISE-GROUP
 server name ISE-PRIMARY
 server name ISE-SECONDARY
 deadtime 15
 ip radius source-interface Loopback0

! Enable 802.1X globally
dot1x system-auth-control

! Enable RADIUS CoA (Change of Authorization)
aaa server radius dynamic-author
 client 10.0.5.10 server-key C0mpl3x$3cretKey!
 client 10.0.5.11 server-key C0mpl3x$3cretKey!

! Enable device tracking for IP-to-MAC mapping
device-tracking tracking auto-source

! Configure access port template
interface range GigabitEthernet1/0/1-48
 description 802.1X Access Port
 switchport mode access
 switchport access vlan 100

 ! Authentication settings
 authentication host-mode multi-auth
 authentication order dot1x mab
 authentication priority dot1x mab
 authentication port-control auto
 authentication periodic
 authentication timer reauthenticate server
 authentication timer inactivity server dynamic
 authentication violation restrict

 ! 802.1X settings
 dot1x pae authenticator
 dot1x timeout tx-period 10
 dot1x max-reauth-req 2

 ! MAB fallback
 mab

 ! Enable spanning-tree portfast (required for timely auth)
 spanning-tree portfast

 ! Apply pre-auth ACL
 ip access-group PRE-AUTH-ACL in

! Pre-authentication ACL (allow DHCP, DNS, ISE portal)
ip access-list extended PRE-AUTH-ACL
 permit udp any any eq 67
 permit udp any any eq 68
 permit udp any any eq 53
 permit tcp any host 10.0.5.10 eq 8443
 permit tcp any host 10.0.5.11 eq 8443
 deny ip any any

Step 4: Configure ISE Authentication Policy

Navigate to Policy > Policy Sets:

Authentication Policy:

Rule Name Condition Allowed Protocols Identity Source
Dot1X-EAP-TLS Radius:EAP-Type EQUALS EAP-TLS EAP-TLS AD with Certificate
Dot1X-PEAP Radius:EAP-Type EQUALS PEAP PEAP-MSCHAPv2 Active Directory
MAB Radius:Service-Type EQUALS Call-Check MAB Lookup Internal Endpoints
Default Default Default Deny Access

Step 5: Configure ISE Authorization Policy

Authorization Policy:

Rule Name Condition Authorization Profile
IT-Admin-Wired AD:Group EQUALS IT-Admins AND Dot1X VLAN10-FullAccess
Employee-Compliant AD:Group EQUALS Domain Users AND Posture:Compliant VLAN100-Corporate
Employee-NonCompliant AD:Group EQUALS Domain Users AND Posture:NonCompliant VLAN200-Remediation
Printer-MAB EndpointIdentityGroup EQUALS Printers VLAN150-Printers
IP-Phone-MAB EndpointIdentityGroup EQUALS IP-Phones VLAN50-Voice
BYOD-Onboarding AD:Group EQUALS BYOD-Users AND !Registered BYOD-Portal-Redirect
Guest-Access GuestEndpointGroup EQUALS GuestEndpoints VLAN300-Guest
Default Default DenyAccess

Authorization Profiles:

Profile: VLAN100-Corporate
  VLAN: 100
  dACL: PERMIT_ALL
  SGT: Employees (0x0005)
  Reauthentication Timer: 28800

Profile: VLAN200-Remediation
  VLAN: 200
  dACL: REMEDIATION-ACL (allow only remediation server access)
  Web Redirection: Posture Discovery
  Reauthentication Timer: 300

Profile: DenyAccess
  Access Type: ACCESS_REJECT

Step 6: Configure Posture Assessment

Navigate to Work Centers > Posture:

Posture Conditions:

- Windows Firewall Enabled (Registry check)
- Antivirus Running and Updated (AV compound condition)
- OS Patch Level Current (Windows Update check)
- Disk Encryption Enabled (BitLocker check)

Posture Requirements:

Requirement: Corporate-Windows-Compliance
  OS: Windows All
  Conditions: Windows Firewall AND Antivirus AND OS Patches
  Remediation: Auto-remediate with AnyConnect ISE Posture Module

Posture Policy:

Rule: Windows-Endpoints
  Identity Group: Any
  OS: Windows All
  Requirement: Corporate-Windows-Compliance

Step 7: Configure TrustSec Segmentation

Enable SGT-based segmentation:

! On switch - enable CTS
cts credentials id SW-ACCESS-01 password CtsP@ss
cts role-based enforcement
cts role-based sgt-map 10.0.100.0/24 sgt 5

! Download SGT policy from ISE
cts role-based permissions

ISE TrustSec Matrix (SGACL):

Source SGT Destination SGT Policy
Employees (5) Servers (10) Permit_HTTP_HTTPS
Employees (5) PCI_Zone (15) Deny_All
IT-Admins (3) Servers (10) Permit_All
Guest (7) Internet (99) Permit_HTTP_HTTPS
Guest (7) Servers (10) Deny_All

Troubleshooting

# On switch - verify authentication status
show authentication sessions
show authentication sessions interface Gi1/0/1 details
show dot1x all

# Check RADIUS connectivity
test aaa server radius ISE-PRIMARY username testuser password testpass

# On ISE - check live logs
# Navigate to Operations > RADIUS > Live Logs
# Filter by MAC address or username
# Review Authentication Details for failure reason

# Common failure reasons:
# 12514 - EAP-TLS handshake failed (certificate issue)
# 22056 - Subject not found in identity store
# 24408 - User not found in Active Directory
# 24454 - User password expired

Best Practices

  • Monitor Mode First - Deploy in monitor mode (open authentication) before closed mode enforcement
  • Low-Impact Mode - Use authentication open with pre-auth dACLs for gradual rollout
  • MAB Database - Pre-populate endpoint database with known MAC addresses for printers, phones
  • Profiling - Enable ISE profiling to automatically classify endpoints by type
  • CoA Support - Ensure Change of Authorization is configured for dynamic policy updates
  • High Availability - Deploy ISE in a Primary/Secondary node pair with PAN failover
  • Certificate Infrastructure - Use machine certificates for EAP-TLS for strongest authentication

References

04 同仓库更多 Skills

NeelakshSaxena
NeelakshSaxena/Vayu

runpodctl

Runpod CLI for managing GPU/CPU workloads from the terminal — pods, serverless endpoints, templates, network volumes, Hub deploys, models, SSH, and file transfer (send/receive). Use for terminal/CI/scripting, Hub browse/deploy, SSH setup, `doctor`, or when the Runpod MCP tools are not connected. For structured tool calls in an MCP-enabled session, prefer runpod-mcp.

★ 0
NeelakshSaxena
NeelakshSaxena/Vayu

runpod

Start here for any Runpod task — running GPU/CPU pods, deploying serverless endpoints, templates, network volumes, building images, or understanding how Runpod works. Routes to the right skill (runpod-mcp, runpodctl, flash, companion-clis, runpod-usage, runpod-templates, runpod-migrate) and indexes two dozen live-verified end-to-end examples (golden paths) — use it when the lane is unclear, and for any multi-step or provisioning task even when it is not.

★ 0
NeelakshSaxena
NeelakshSaxena/Vayu

runpod-usage

How Runpod works and how to work it — pods vs serverless, GPU/VRAM selection, storage, building a container, networking, plus the agentic pod development loop (provision → ssh-exec → set up → poll readiness) and on-pod install hygiene (uv/apt). Use to answer "how does X work", "which GPU", "how do I build a container", or "how do I stand up a workload on a pod". Guidance, not a tool — execute with runpodctl, runpod-mcp, or flash.

★ 0
NeelakshSaxena
NeelakshSaxena/Vayu

runpod-templates

Runpod's official prebuilt pod templates (ComfyUI, PyTorch, and others): what each image ships, which ports and paths it uses, how to pick one, how to pin a version, and what is missing on first boot. Use when a task says "run <X> on a pod" and an official template already covers it, instead of building an image — and when a user needs help with or wants to fix something about a Runpod template they are already running (won't boot, can't reach the UI, missing models, wrong CUDA line, broken ComfyUI workflow metadata on imported workflows): start here and route onward. Deploy with runpodctl or runpod-mcp; end-to-end walkthroughs live in the runpod router's golden paths.

★ 0
NeelakshSaxena
NeelakshSaxena/Vayu

runpod-migrate

Migrate a codebase from the Runpod GraphQL API or REST v1 to REST v2 — inventory which parts use which API version, rewrite the call sites, flag breaking changes, and verify. Use when someone asks to move to v2, asks what v2 would change, or asks which Runpod API their code is on. For managing infrastructure rather than migrating code, use runpod-mcp or runpodctl.

★ 0
NeelakshSaxena
NeelakshSaxena/Vayu

runpod-mcp

Manage Runpod infrastructure — pods, serverless endpoints, jobs, templates, network volumes, container-registry auth, GPU/CPU catalog, and billing — via the Runpod MCP server's structured tool calls. Use when the Runpod MCP tools (create-pod, list-endpoints, …) are connected in this session, or to connect them (hosted OAuth or local npx). Prefer this over runpodctl for plain infra CRUD when MCP is available; use runpodctl for the terminal, file transfer, or SSH setup.

★ 0